Shop Concrete Block Machines & Production Lines
Browse our complete range of automatic, mobile, and stationary block machines. European design with airbag systems and four vibration motors — engineered for higher density and lower noise.
All Products
1476 products found
High quality block machine
Factory Supply QT8-15 Block Making Machine – Brick Making
<p><strong>QT8-15 Hydraulic Concrete Block Making Machine, 21MPa Pressure, 45KN Vibration, 950×900mm Pallet</strong> — sits in the mid-to-high automatic tier of the Shiyue range, bridging semi-automatic setups and large-capacity lines. Platform vibration paired with hydraulic demolding keeps block density consistent across hollow, solid and paver formats, while the 15–20s molding cycle supports steady daily output for plants with ~300m² floor space.</p> <ul> <li>Capacity calculation stated per block format, not a single catalogue figure</li> <li>Voltage, frequency and PLC language confirmed before production starts</li> <li>Mould drawings and format list supplied with quotation, including custom designs</li> <li>Factory test record and packing photos shared before shipment</li> </ul>
High quality block machine
QT4-15 Automatic Block Machine for Hollow Block – Full Range
<p><strong>QT4-15 Fully Automatic Concrete Block Making Machine, 16–21 MPa, 55 kN Vibration</strong> — mid-tier in our complete block machine range, helping you compare output tiers, automation levels and plant footprint before narrowing down. Platform vibration paired with hydraulic demolding ensures block strength matches your mix design and local aggregate, while the 880×550 mm pallet size must align with your curing area and forklift. Configuration set against your actual block format, not a catalogue default, with installation and operator training included.</p>
High quality block machine
QT10-15 Concrete Blocks Molding Machine | Full Range
<p><strong>QT10-15 Automatic Concrete Block Making Machine, PLC Control, Independent Hydraulic Station</strong> — positioned in the high-capacity automatic tier of Shiyue's full range, covering hollow block, solid brick and paving formats through simple mould change. Vibration force and hydraulic pressure are matched to your mix design and local aggregate, with pallet size confirmed against your curing area and existing forklift.</p> <ul> <li>Output: 1,800–2,400 pcs/h based on 400×200×200mm hollow block, 10 pcs/mould, 15–20s cycle</li> <li>Output: 5,184–6,480 pcs/h based on 200×100×60mm paving block, 27 pcs/mould, 20–25s cycle</li> <li>Line components specified as one system: pallet feeder, press, hopper, conveyor, hydraulic unit, PLC cabinet</li> </ul> <p>Machine, mould, pallet and handling configured together as a single matched system, voltage and PLC language confirmed before production, factory test record provided prior to shipment.</p>
High quality block machine
QT8-15 Hollow Block Making Machine | Full Range Manufacturer
<p><strong>QT8-15 Hydraulic Block Making Machine, 21MPa Rated Pressure, 45KN Vibration Force, 950×900mm Pallet</strong> — part of our complete block machine range spanning mobile, semi-automatic and fully automatic tiers, helping buyers place themselves before narrowing down. Platform vibration at 2800-4500 r/min pairs with hydraulic demolding for consistent density across hollow blocks, pavers and kerbstones. Machine, mould, pallet and handling specified as one matched system against your actual mix design and target block format rather than catalogue defaults.</p> <ul> <li>Molding cycle 15-20s per format — capacity calculation provided per block type assumed</li> <li>Overall power 55.5kW, total mass 8T, factory area 300m²</li> <li>Raw materials: crushed stone, sand, cement, fly ash, gravel, slag</li> <li>Loading: 1×40HQ container for basic equipment</li> <li>Voltage, frequency and PLC language confirmed before production</li> </ul>
High quality block machine
QT4-18 Semi-Automatic Concrete Block Making Machine – Manufacturer
<p><strong>QT4-18 Semi-Automatic Concrete Block Making Machine, 40-50KN Vibration Force, 850×550mm Pallet</strong> — positioned in the mid-tier of our block machine range, bridging small workshop units and fully automatic lines.</p> <ul> <li>Hydraulic station paired with bed and upper mould vibration delivers uniform block density across hollow block, solid brick and paver formats</li> <li>Semi-automatic layout with automatic stacker supports a future automation upgrade path as production scales</li> </ul> <p>Every configuration is matched to your local aggregate, target block format and existing curing setup before production begins.</p>
High quality block machine
QT4-18 Hydraulic Concrete Block Making Machine – Full Range
<p><strong>QT4-18 Hydraulic Concrete Block Making Machine, 24KW, 40-50KN Vibration</strong> — positioned in the mid-tier of our range, this semi-automatic model bridges small workshop output and high-capacity lines. Hydraulic pressure paired with controlled vibration delivers consistent density across hollow blocks, solid bricks, and pavers on a single host machine with 850×550×25mm pallets.</p> <ul> <li>15-25s molding cycle (confirm based on your block format and mix)</li> <li>JQ350 mixer matched to feed rate</li> <li>Format change by mould swap</li> </ul> <p>Every quotation includes a capacity calculation tied to the exact block format you sell, not a generic catalogue figure.</p>
High quality block machine
QT4-15 Concrete Block Making Machine | Full Range Manufacturer
<p><strong>QT4-15A Concrete Block Making Machine, 16–21 MPa Hydraulic Pressure, 55 kN Vibration Force</strong> — configured for consistent block density across hollow, solid, and interlocking formats.</p> <ul> <li>Platform vibration at 4200 r/min with 880×550 mm pallet compatibility</li> <li>Molding cycle and output matched to your block format and local aggregate</li> <li>Configuration set against your actual mix design and target block format</li> </ul>
High quality block machine
QT4-15 Block Moulding Machine | Full Range
<p><strong>QT4-15A Fully Automatic Concrete Block Making Machine, 16–21 MPa, 880×550 mm Pallet</strong> — positioned in the mid-tier of Shiyue's full machine range, this model lets buyers compare automatic, semi-automatic and mobile options before committing to a single configuration. Platform vibration at 55 kN paired with hydraulic demolding delivers consistent block density, while the 4 T machine mass and 300 m² plant footprint serve as practical references for first-time site planning.</p> <ul> <li>Configured as one matched system with moulds, pallets and handling equipment to your local aggregate and target block format</li> </ul>
High quality block machine
QT4-15 Paving Block Machine Full Range Manufacturer
<p><strong>QT4-15A Fully Automatic Concrete Block Making Machine, 55 kN Vibration, 880×550 mm Pallet</strong> — positioned in Shiyue's mid-tier range, this model delivers fully automatic operation with platform vibration and hydraulic demolding for buyers moving beyond semi-automatic setups.</p> <ul> <li>16–21 MPa rated pressure paired with 55 kN vibration force, configured to match your mix design and local aggregate</li> <li>880×550 mm pallet size selected against your curing area and forklift</li> <li>Full format coverage: hollow, solid, paving, interlocking, curbstone with custom mould design</li> </ul> <p>Line layout, capacity calculation, and mould drawings provided per your target block format, so output expectations match reality.</p>
High quality block machine
QT4-15 Automatic Brick Making Machine – Factory Supply
<p><strong>QT4-15A Fully Automatic Concrete Block Making Machine, 16–21 MPa Rated Pressure, 55 kN Vibration Force</strong> — positioned in the mid-tier of our block machine range, balancing hydraulic pressure and platform vibration to match your local aggregate and target block format. Pallet size 880×550 mm and molding cycle 25–30 s are stated with format context, so curing area and daily output align with your plant layout.</p> <ul> <li>4 T total mass, 18.45 kW overall power, 300 m² factory area required</li> <li>Applied products: hollow/solid blocks, pavers, interlocking blocks, curbstone</li> <li>Fully automatic operation with hydraulic demolding</li> </ul> <p>Specified as one matched system — machine, mould, pallet and handling designed together against your actual mix and site conditions.</p>
High quality block machine
QT4-15 Concrete Block Making Machine | Manufacturer
<p><strong>QT4-15 Fully Automatic Concrete Block Making Machine, 16–21 MPa, 55 kN Vibration</strong> — positioned in the mid-tier of Shiyue's range for buyers scaling from semi-auto to full automation. Platform vibration at 4200 r/min is matched to hydraulic pressure for consistent block density across hollow, solid and paving formats. 880 × 550 mm pallet size and PLC control are confirmed to your site voltage and language before production.</p> <ul> <li>Capacity stated per block format, not as a single unqualified number</li> <li>Mould, pallet and handling specified as one matched system</li> <li>Operator training and wear parts support included at commissioning</li> </ul>
High quality block machine
QT8-15 Hydraulic Block Making Machine – Full Range
<p><strong>QT8-15 Hydraulic Block Making Machine, 950×900mm Pallet, 21MPa Pressure</strong> — positioned in the mid-to-upper tier of our complete block machine range, bridging small workshop models and high-capacity automatic lines. Platform vibration at 2800-4500 r/min paired with 45KN force ensures consistent block density, while hydraulic demolding delivers clean release across hollow, solid and paver formats. Molding cycle runs 15-20s depending on block geometry and mix design.</p> <ul> <li>Line layout and capacity calculation provided per block format so daily output matches expectations</li> <li>Machine, mould, pallet and handling specified as one matched system from a single source</li> <li>Automation level selectable from semi-automatic through to full automatic stacking and cubing</li> </ul>
Engineered for global performance.
European Design
Airbag systems & 4 vibration motors for higher density
108+ Countries
Trusted exports across Africa, MENA, Asia, LATAM
Full Customization
320+ engineers tailor solutions to local materials
Fast Delivery
In-stock models ship within 15-30 days
Can't find the right model?
Tell us your block size, daily capacity, raw materials and voltage. Our engineers will design a tailored solution within 24 hours.