QT10-15 Concrete Blocks Molding Machine | Full Range

Integrated System Specification — the QT10-15 block making machine, moulds, pallets and handling are matched as one system, preventing the mismatched capacity and output gaps buyers face when sourcing components separately.

Technical Specifications

Application Suitability

What the Quoted Capacity Figure Leaves Out

Real daily output depends entirely on the block format you produce, not the machine’s maximum cycle rating.

A capacity figure like "2,400 pieces per hour" means nothing if the buyer assumes it applies to paving blocks when it was actually calculated for a 400x200mm hollow block. I have seen QT10-15 block machine manufacturer quotes that list a single peak number, only for the buyer to realize after installation that their actual paving block target yields a fraction of that volume. The vibration force, hydraulic pressure, and cycle time must be matched to the specific mix design and aggregate available at the site [NEED_CITE: block density and compressive strength testing standards].

Positioning the QT10-15 Automatic Concrete Block Making Machine for Sale in the Product Range

The QT10-15 sits in the high-capacity automatic tier of the Shiyue range. It is specified for buyers who need continuous production across multiple formats—hollow blocks, solid bricks, and paving stones—without switching to a different press. This tier requires a dedicated plant footprint with space for raw material feeding, curing racks, and pallet circulation, distinguishing it from mobile or egg-laying units that operate directly on a concrete floor.

Line Configuration and Component Matching

A block line is only as fast as its slowest station. If the pallet feeder cannot keep up with the press cycle, the QT10-15 sits idle. Our proposal specifies the pallet feed machine, storage hopper, and conveyor as a matched set, ensuring the press is never left waiting for material or pallets [NEED_CITE: industrial line balancing and throughput theory]. The independent integrated hydraulic station is isolated from the host vibration, which maintains system reliability over long production shifts.

How Vibration and Pressure Determine Block Integrity

The vertical station mode resonance with automatic FM-AM vibration is not just a technical detail; it is what ensures consistent block density. When the vibration force and hydraulic pressure are correctly matched to the buyer’s local aggregate—such as river sand with high clay content or crushed stone—the resulting blocks achieve the required compressive strength. If the mix design is too wet or the aggregate is poorly graded, the vibration will cause segregation, leading to weak blocks that crack during handling or curing.

The Hidden Cost of Ignoring Site Conditions

Configuring a machine for a standard catalogue mix that the buyer cannot source locally forces a costly material change after arrival. I recall a project in West Africa where the local river sand had a high silt content; the standard vibration settings produced blocks with surface bubbles and low strength, cutting daily output in half until the parameters were recalibrated. Voltage and frequency mismatches can also delay commissioning for weeks if the control cabinet does not match the local grid [NEED_CITE: electrical grid frequency standards by region].

Why Source the QT10-15 from Shiyue

We specify the machine, mould, pallet, and handling equipment as one matched system. The capacity calculation in our proposal states the block format assumed for every output figure, so there are no surprises. Moulds are designed for the formats the buyer’s market actually sells, including custom drawings. The automation level is selectable, allowing a buyer to start with a standard configuration and upgrade pallet handling or stacking later. Installation support includes operator training to ensure the crew can manage mould changes and daily maintenance.

Documentation & Verification

• Line layout and capacity calculation stating the block format assumed for each output figure.
• Machine specification sheet confirming pallet size, hydraulic pressure, and vibration force ratings.
• Mould drawing and format list showing the exact block dimensions and cycle times.
• Voltage, frequency, and PLC display language confirmation signed before production begins.
• Factory test record and packing photographs provided prior to container loading.

Installation, Commissioning & Support

• Foundation requirements specified based on the QT10-15 vibration force and total line weight.
• Dedicated electrical circuit planned according to the confirmed voltage and frequency.
• Machine shipped in dismantled form for container loading, with reassembly supervised on site.
• Initial commissioning includes parameter tuning to the buyer’s actual raw material sample.
• Operator training covers mould change procedures, PLC troubleshooting, and daily lubrication.
• Wear parts list and mould maintenance schedule provided for long-term production planning.

Next Steps for Sizing Your Block Plant

To move forward, we need your target block format, required daily output, and a sample of your local raw material. Please also confirm your site’s voltage, frequency, and the language your operators require for the PLC display. This information allows us to build a capacity calculation that reflects your actual production conditions.

Frequently Asked Questions

Q: How does the QT10-15’s capacity differ across hollow block, solid brick, and paving block formats?
A: The output varies significantly by format. For a 400x200x200mm hollow block, the rate is 1,800–2,400 pcs/hour (basis: 10 pcs/mould, 15–20s cycle). For a 200x100x60mm paving block, the rate is 5,184–6,480 pcs/hour (basis: 27 pcs/mould, 20–25s cycle). We always state the format assumed in any capacity figure.

Q: Where does the QT10-15 sit in Shiyue’s range compared to semi-automatic and mobile models?
A: The QT10-15 is in the high-capacity automatic tier, designed for fixed plants with pallet circulation and curing racks. Semi-automatic models suit smaller investments with manual pallet handling, while mobile or egg-laying machines produce blocks directly on a concrete floor without pallets, suitable for on-site project work.

Q: What plant footprint and investment level should I plan for this tier?
A: This tier requires space for the press, raw material feeding, pallet circulation, and a curing area large enough to hold at least one day’s production. The investment level is higher than semi-automatic lines due to the automatic pallet feeder and conveyor systems, but it reduces labour requirements and increases consistency.

Q: Which voltage, frequency, and PLC language options are confirmed before shipment?
A: We confirm these details with the buyer before production begins. The QT10-15 block machine manufacturer configuration must match the local grid (e.g., 380V/50Hz or 440V/60Hz) and the PLC display language must be readable by the site operators to ensure smooth commissioning.

Q: What supporting equipment (pallet handling, stacking, curing) is included vs. optional at this tier?
A: The standard line includes the pallet feed machine, storage hopper, and conveyor. Automatic stacking and cubing systems for the cured blocks are available as options. We specify the pallet size and material based on the curing area and the forklift the buyer already has on site.