Shop Concrete Block Machines & Production Lines
Browse our complete range of automatic, mobile, and stationary block machines. European design with airbag systems and four vibration motors — engineered for higher density and lower noise.
All Products
1476 products found
High quality block machine
QT8-15 Hydraulic Block Making Machine – Full Range Manufacturer
<p><strong>QT8-15 Hydraulic Concrete Block Making Machine, 21 MPa, 45 kN Vibration, 950×900 mm Pallet</strong> — positioned in the mid-to-high output tier of a complete range spanning automatic, semi-automatic and mobile block machines, helping buyers match investment level and plant footprint to their target format before narrowing down.</p> <ul> <li>Platform vibration at 2800–4500 r/min paired with hydraulic demolding for consistent block density across hollow, solid, paver and interlocking formats</li> <li>55.5 kW overall power with 8 T total mass, factory area requirement 300 m²</li> <li>CE-marked, shipped in 1×40HQ container</li> </ul> <p>Configuration is set against your actual mix design and local aggregate, not a catalogue default, with line layout and capacity calculation stated per block format.</p>
High quality block machine
QT10-15 Automatic Cement Block Making Machine | Full Range
<p><strong>QT10-15 Automatic Cement Block Making Machine, PLC Control, Independent Hydraulic Station</strong> — positioned in the high-capacity tier of the Shiyue range, this model uses vertical station mode resonance with automatic FM-AM to maintain consistent block density. Cycle times are stated per format: 15-20s for hollow blocks, 20-25s for pavers, with output calculated against each specific block size and mould cavity count.</p> <ul> <li>Machine, mould, pallet and handling equipment are specified as one matched system rather than sourced separately, so pallet size, voltage, frequency and PLC language are confirmed before production.</li> </ul>
High quality block machine
QT12-15 Block Making Machine for Concrete Blocks – Full Range Manufacturer
<p><strong>QT12-15 Hydraulic Concrete Block Making Machine, 62 kW, 1300×900 mm Pallet</strong> — sits at the high-capacity automatic tier of the Shiyue range. Table vibration with frequency conversion and four-axis synchronization delivers consistent density across hollow, solid, paving and interlocking formats. Moulding cycle 15-30 seconds varies by block type, so output is stated per your target format, not a single headline number. One machine, multi-mould capability.</p> <p>Specified as a matched system — machine, mould, pallet and handling — against your actual mix design and local aggregate, with line layout and capacity calculation confirming the format assumed.</p> <ul> <li>Model: QT12-15</li> <li>Total Power: 62 kW</li> <li>Pallet Size: 1300×900 mm</li> <li>Vibration: Table type, four-axis synchronized</li> <li>Moulds: Customized to buyer's block format</li> <li>Voltage: Customized to local industrial supply</li> <li>Versatility: Wall blocks, porous bricks, pavement bricks, slope protection bricks</li> </ul>
High quality block machine
Block Machine with Automatic Interlocking Mold – Factory Supply
<p><strong>QT4-15A Fully Automatic Concrete Brick Making Machine, 16-21 MPa, 55 kN Vibration, 880×550 mm Pallet</strong> — positioned in the mid-tier automatic range for buyers scaling beyond workshop volume. Hydraulic pressure and platform vibration at 4200 r/min are matched to your local aggregate and mix design for consistent block density across hollow blocks, pavers and interlocking bricks. Mould change and automation level are specified as one integrated system.</p> <ul> <li>Machine, mould, pallet and handling configured together against your actual block format</li> <li>Capacity calculation provided per format with cycle time assumptions stated upfront</li> <li>Voltage, frequency and PLC language confirmed before shipment to avoid commissioning delays</li> </ul>
High quality block machine
QT6-15 Hydraulic Block Machine Full Range Manufacturer
<p><strong>QT6-15 Hydraulic Block Making Machine, 37 kW, 45 kN vibration, PLC touch screen</strong> — positioned in the mid-to-upper tier of our full automatic range. Hydraulic pressure and platform vibration are matched to your mix and block format, with pallet size 880×850 mm confirmed against your curing area and forklift before dispatch.</p> <ul> <li>Output stated per block format: hollow, solid, and paver cycles listed separately</li> <li>Independent hydraulic station isolated from vibration for longer service life</li> <li>Mould drawing, pallet spec, and factory test record supplied with quotation</li> </ul>
High quality block machine
QT10-15 Interlocking Concrete Blocks Making Machine | Manufacturer
<p><strong>QT10-15 Automatic Concrete Block Making Machine, PLC Control, Independent Hydraulic Station</strong> — configured as a complete multi-component line with pallet feeder, storage hopper, conveyor and hydraulic unit matched to the press.</p> <ul> <li>Vertical station mode resonance with automatic FM-AM tuning vibration across hollow block, paver and interlocking brick formats</li> <li>Mould replacement enables multi-format production on one press within the automatic tier of the range</li> </ul> <p>Capacity figures confirmed per block format with mould cavity count and cycle time stated in the line layout. Every specification set against your local aggregate and target product before production starts.</p>
High quality block machine
QT8-15 Block Making Machine for Concrete Products | Full Range
<p><strong>QT8-15 Hydraulic Concrete Block Making Machine, 21MPa Rated Pressure, 950×900mm Pallet, 45KN Vibration Force</strong> — positioned in the mid-to-high tier of our automatic range, bridging workshop volume and high-capacity lines. Platform vibration frequency adjusts from 2800–4500 r/min to match your mix design and target format, while hydraulic demolding ensures consistent density across hollow blocks, pavers, and kerbstones. Mould changes cover multiple formats on a single press, with pallet size selected to align with standard curing racks and forklifts. Supplied as a matched system — machine, mould, pallet, and handling specified together against your actual aggregate and block format, not a catalogue default.</p>
High quality block machine
QT4-15 Hydraulic Block Machine for Hollow Block – Manufacturer
<p><strong>QT4-15A Fully Automatic Hydraulic Block Machine, 16–21 MPa Pressure, 880×550 mm Pallet</strong> — positioned in the mid-tier of the Shiyue block machine range for buyers moving from semi-automatic or mobile setups into a fixed plant.</p> <ul> <li>Hydraulic pressure paired with 55 kN platform vibration at 4200 r/min ensures consistent block density across the pallet area</li> <li>300 m² factory footprint keeps the line compact while supporting hollow blocks, pavers, and interlocking formats</li> </ul> <p>Configuration is matched to your local aggregate and target block format, with mould and pallet specified as one integrated system.</p>
High quality block machine
QT4-15 Block Manufacturing Machine | Full Range Manufacturer
<p><strong>QT4-15A Fully Automatic Concrete Block Making Machine, 16-21MPa Hydraulic Pressure, 55KN Vibration Force, 880×550mm Pallet</strong> — positioned between workshop-scale and high-capacity tiers, this model pairs platform vibration with adjustable hydraulic pressure to match block density requirements across hollow block, solid block, paver and interlocking brick formats within a 300m² plant footprint. Mould, pallet and handling systems are specified as one matched line rather than sourced separately, with capacity calculation stated per actual block format before order confirmation</p>
High quality block machine
QT6-15 Block Machine for Concrete Blocks – Full Range Manufacturer
<p><strong>QT6-15 Hydraulic Concrete Block Making Machine, 37 kW, 45 kN Vibration Force</strong> — positioned in the mid-tier of the Shiyue block machine range, bridging semi-automatic entry-level models and high-capacity automatic lines.</p> <ul> <li>Platform vibration with adjustable 0–60 Hz frequency, matched to pallet size 880×850 mm and multi-format moulds</li> <li>Independent integrated hydraulic station isolated from press vibration for consistent demolding</li> <li>PLC touch screen control with fault diagnosis; voltage, frequency and display language confirmed before shipment</li> </ul> <p>Configuration, mould design and pallet handling specified as one matched system against your local aggregate and target block format — not assembled from separate suppliers.</p>
High quality block machine
QT10-15 Block Moulding Machine for Hollow Block – Manufacturer
<p><strong>QT10-15 Hydraulic Block Making Machine, PLC Control, Vertical Vibration</strong> — specified as a matched system with pallet feed, conveyor, and independent hydraulic station rather than assembled from separate suppliers.</p> <ul> <li>Capacity stated per format: 1800-2400 pcs/hour based on 400×200×200mm hollow block (10 pcs/mould, 15-20s cycle)</li> <li>Mould change designed for quick replacement, keeping format flexibility usable within a single shift</li> <li>Independent hydraulic station isolated from host vibration and dust to reduce wear</li> </ul> <p>Every quotation includes a line layout and capacity calculation stating the exact block format assumed, so daily output matches expectation on day one. (record 83067)2.</p>
High quality block machine
QT8-15 Block Machine Mold | Manufacturer
<p><strong>QT8-15 Hydraulic Concrete Block Making Machine, 21MPa Rated Pressure, 45KN Vibration Force, 950×900mm Pallet</strong> — positioned in the mid-to-high automatic tier, this model pairs hydraulic pressure with adjustable platform vibration (2800-4500 r/min) to maintain consistent block density across hollow blocks, pavers and curbstones. Molding cycle ranges from 15-20s depending on block format and mix design.</p> <ul> <li>Configured against your local aggregate and target block format with line layout and capacity calculation provided</li> <li>Pallet size and handling equipment matched to your existing curing area and forklift</li> <li>Factory test record demonstrates actual cycle time on your specific product before shipment</li> </ul>
Engineered for global performance.
European Design
Airbag systems & 4 vibration motors for higher density
108+ Countries
Trusted exports across Africa, MENA, Asia, LATAM
Full Customization
320+ engineers tailor solutions to local materials
Fast Delivery
In-stock models ship within 15-30 days
Can't find the right model?
Tell us your block size, daily capacity, raw materials and voltage. Our engineers will design a tailored solution within 24 hours.