Shop Concrete Block Machines & Production Lines
Browse our complete range of automatic, mobile, and stationary block machines. European design with airbag systems and four vibration motors — engineered for higher density and lower noise.
All Products
1875 products found
Stationary block machine
QT8-15 Concrete Block Making Machine for Cement Brick – Manufacturer
<p><strong>QT8-15 Automatic Concrete Block Making Machine, 21 MPa Hydraulic Pressure, 950×900 mm Pallet, PLC Control</strong> — positioned in the mid-to-upper tier of our stationary block machine range, bridging workshop-scale and high-capacity production lines.</p> <ul> <li>Platform vibration at 2800–4500 r/min with 60 kN force matched to hydraulic pressure for consistent compaction across hollow, solid, and paving formats</li> <li>Fully automatic cycle with HMI interface; 600 m² factory area and 55.5 kW overall power define the plant footprint</li> <li>9 T total mass, 12 T/day water consumption</li> </ul> <p>Every configuration is set against your actual mix design and target block format, with per-format capacity calculation documented before order confirmation.</p>
Stationary block machine
QT12-15 Concrete Block Machine | Full Range Manufacturer
<p><strong>QT12-15 Automatic Concrete Block Making Machine, 100 kN Vibration Force, 1220×900 mm Pallet, PLC Control</strong> — positioned at the high-capacity tier of our stationary range, this press is specified alongside mould, pallet and handling as one matched system. Platform vibration with 0–60 Hz variable frequency is balanced against hydraulic pressure to suit your local aggregate and mix design.</p> <ul> <li>Fully automatic cycle with semi-closed forced feeding for uniform material distribution</li> <li>Voltage, frequency and PLC display language confirmed before dispatch</li> <li>Machine, mould, pallet and handling specified as one matched system</li> </ul>
Stationary block machine
QT4-15 Hollow Block Making Machine | Manufacturer
<p><strong>QT4-15 Stationary Block Making Machine, 27.5 kW, PLC Control, 40 kN Vibration Force</strong> — configured as the entry-to-mid tier in our stationary block machine range, with table-and-mould synchronous vibration and swing-type hopper for uniform material distribution across hollow, solid, and paving block formats.</p> <ul> <li>150 m² workshop footprint with semi-automatic pallet handling</li> <li>Photoelectric-controlled feed system and JS500 mixer included</li> <li>380V supply, 3–4 workers, 5 T net weight</li> </ul>
Stationary block machine
QT4-16 Block Making Machine for Hollow Block | Full Range Manufacturer
<p><strong>QT4-16 Stationary Block Making Machine, 21 MPa Hydraulic Pressure, 40 kN Vibration Force</strong> — positioned within the full stationary range as a mid-tier press where platform vibration at 2800–4500 r/min is matched to hydraulic pressure for consistent block density across hollow blocks, pavers, and interlocking formats. The 900×550 mm pallet size is confirmed against your curing area and forklift before production.</p> <ul> <li>Configuration set against your actual mix design and target block format</li> <li>Machine, mould, pallet and handling specified as one matched system</li> <li>Factory test record and packing photographs provided before shipment</li> </ul>
Stationary block machine
QT4-15 Stationary Concrete Block Making Machine | Full Range
<p><strong>QT4-15 Stationary Block Machine, 27.5KW, 380V, 1020×570mm Pallet</strong> — positioned in the mid-tier of our stationary range, specified as one matched system with mould, pallet and handling equipment rather than assembled from separate suppliers.</p> <ul> <li>Siemens motor with computer-controlled directional vibration and frequency brake</li> <li>Low-frequency feeding plus high-frequency vibration liquefies concrete in 2–3 seconds</li> <li>Hopper swing-type cutting device ensures uniform material distribution</li> </ul> <p>Configuration set against your actual mix design, local aggregate and target block format — not a catalogue default.</p>
Stationary block machine
QT8-15 Fully Automatic Hydraulic Block Machine | Factory Supply
<p><strong>QT8-15 Fully Automatic Hydraulic Block Machine, 21 MPa, 950×900 mm Pallet, 55.5 kW</strong> — positioned in the mid-to-high output tier of the Shiyue stationary range for buyers scaling beyond semi-automatic lines.</p> <ul> <li>Multiaxis synchronizer vibration with 45 kN force matched to 21 MPa hydraulic pressure ensures consistent compaction across hollow, solid, and paver formats on the 950×900 mm pallet.</li> <li>Long-period over-length guide bearings keep upper mould alignment precise, reducing block dimension drift over extended production runs.</li> <li>Fully automatic computer-controlled operation lowers labor intensity while maintaining density uniformity cycle after cycle.</li> </ul> <p>Capacity and cycle time are quoted per block format — not as a single unqualified number — so your daily output matches the specification before the machine ships.</p> <p><strong>Machine, mould, pallet and handling specified as one matched system</strong> against your actual mix design and local aggregate, with voltage and PLC language confirmed before production.</p>
Mobile block machine
Small Mobile Concrete Brick Making Machine – Full Range
<p><strong>QMJ2-45 Mobile Concrete Block Making Machine, No Pallet Required, Manual Operation</strong> — entry-tier egg-laying block maker for on-site production without fixed plant infrastructure.</p> <ul> <li>Mould interchangeability supports 400×200, 400×150 and 400×100mm hollow block formats from one frame</li> <li>Hydraulic pressure and vibration force are matched to your local aggregate and target block strength before dispatch</li> <li>1–3 workers operate the unit with no fixed electrical setup needed</li> <li>Free-moving design suits constrained or temporary project sites</li> </ul> <p>Supplied as a matched system with pallet spec, mould drawing and capacity calculation tied to each block format.</p>
Mobile block machine
QMJ2-45 Mobile Concrete Block Making Machine – Full Range Manufacturer57
<p><strong>QMJ2-45 Mobile Concrete Block Making Machine, Palletless Egg-Laying Design, 25–30s Molding Cycle</strong> — hand-pushed unit producing blocks directly on the ground with 1–3 workers, no pallet investment required.</p> <ul> <li><strong>Three hollow brick formats</strong> on one frame: 400×200×200mm, 400×150×200mm, and 400×100×200mm, with mould swap supported for format flexibility</li> <li>Output tiered per block size — sits at the entry point of our full range, positioned for buyers who need on-site production before scaling to semi-automatic or automatic lines</li> </ul> <p>Configuration set against your local aggregate and target format, not a catalogue default — machine, mould and curing area specified as one matched system.</p>
Mobile block machine
QMJ4-45 Mobile Egg Laying Block Machine – Full Range
<p><strong>QMJ4-45 Mobile Egg-Laying Block Machine, 6 kW, Diesel/Petrol Engine</strong> — positioned in the mobile tier of our range for on-site production without a fixed plant, delivering 4 pcs per mould for 400×200×200mm hollow blocks with a 45 s cycle and mold vibration at 2400 r/min. Low-investment entry before stepping to semi-automatic or automatic lines.</p> <ul> <li>CE marked, engine-driven for remote sites without grid power</li> <li>Block machinery as a single focus — machine, mould and pallet specified as one matched system</li> <li>Configuration set against your actual mix design, local aggregate and target block format</li> <li>Installation support with operator training and mould supply included</li> </ul>
Mobile block machine
QMY12-15 Mobile Block Machine for Hollow Blocks – Full Range
<p><strong>QMY12-15 Mobile Block Machine, 9/8/6/4 Inch Hollow & Solid Blocks, Hydraulic Pressure with Vibration</strong> — lays concrete blocks directly on the ground without pallets or curing racks, reducing site footprint and handling equipment for contractors and first-time producers.</p> <ul> <li>Supports 9, 8, 6 and 4 inch hollow and solid block formats from one base machine</li> <li>Mobile egg-laying design moves between job sites as the project advances</li> <li>PLC-controlled forming cycle with mould-change capability across four block thicknesses</li> </ul> <p>Shiyue specifies every mobile unit against the buyer's actual block format and local aggregate, so capacity expectations match real site conditions from day one.</p>
Mobile block machine
QMJ4-45 Mobile Egg Laying Block Machine for Hollow Block – Full Range
<p><strong>QMJ4-45 Mobile Egg Laying Block Machine, 6 kW Diesel/Petrol Engine, 45 s Molding Cycle</strong> — designed for on-site hollow block production without a fixed plant or pallet circulation system. The twice-vibration molding core delivers consistent block density across formats, while engine-powered operation removes dependency on grid electricity for remote sites. Capacity figures are tied to specific hollow block dimensions and cycle times so buyers can match output to their actual market format. Backed by matched machine and mould specification, line layout stating assumed block format, and mould design available to buyer drawings.</p>
Mobile block machine
QMJ2-45 Mobile Concrete Block Making Machine for Hollow Block – Full Range
<p><strong>QMJ2-45 Mobile Concrete Block Making Machine, Hand-pushed Egg-laying Type, 1-3 Workers, No Pallets Required</strong> — produces hollow blocks directly on the ground across three standard formats, with cycle times of 25-30 seconds per mould. Designed for small working areas and on-site production without fixed plant infrastructure, where pallet cost and curing logistics are eliminated.</p> <ul> <li>Output capacity stated per block format and mould cavity count, not a single headline figure</li> <li>Mould change enables production of 400×200×200mm, 400×150×200mm, and 400×100×200mm hollow blocks</li> </ul> <p>Machine, mould and handling specified as one matched system, with configuration set against your local aggregate and target block format.</p>
Engineered for global performance.
European Design
Airbag systems & 4 vibration motors for higher density
108+ Countries
Trusted exports across Africa, MENA, Asia, LATAM
Full Customization
320+ engineers tailor solutions to local materials
Fast Delivery
In-stock models ship within 15-30 days
Can't find the right model?
Tell us your block size, daily capacity, raw materials and voltage. Our engineers will design a tailored solution within 24 hours.