Shop Concrete Block Machines & Production Lines
Browse our complete range of automatic, mobile, and stationary block machines. European design with airbag systems and four vibration motors — engineered for higher density and lower noise.
Stationary block machine
398 products found
Stationary block machine
Full Automatic Block Machine QT10-15 for Concrete – Manufacturer
<p><strong>QT10-15 Full Automatic Block Machine, 100 kN Vibration, 1100×900 mm Pallet, Siemens PLC</strong> — positioned in the high-capacity tier of our stationary range, this press is specified alongside batching, mixing, pallet feeding and stacking as one matched line. Hydraulic pressure and platform vibration are balanced to the buyer's mix design and block format, while the 1100×900 molding area supports hollow, solid, interlocking and paving production. Configuration confirmed against local aggregate, curing setup and site voltage before production begins.</p> <ul> <li>Molding period: 15 seconds per cycle</li> <li>Workshop footprint: 200 m²</li> <li>CE-standard components throughout</li> <li>Moulds carburized to 54–58 HRC, lifespan over 100,000 cycles</li> </ul>
Stationary block machine
Semi Automatic Block Machine QTJ4-24 | Full Range
<p><strong>QTJ4-24 Semi Automatic Block Machine, 45 kN Vibration, PLC Control, 850×450 mm Pallet</strong> — positioned in the semi-automatic tier of our stationary range, this model pairs dual-level vibration with spiral material distribution for consistent density across hollow, solid and interlocking formats. Moulds are matched to your local aggregate and target block strength, not a catalogue default. Every proposal includes line layout, pallet specification and voltage confirmation before production.</p>
Stationary block machine
QT5-15 Hydraulic PLC Controlled Block Machine – Full Range
<p><strong>QT5-15 Hydraulic PLC Controlled Block Machine, 21MPa Rated Pressure, 1100×550mm Pallet</strong> — mid-tier stationary block machine with platform vibration (2800–4500 r/min) and hydraulic demolding for hollow blocks, solid blocks, pavers, and curbstones.</p> <ul> <li>Molding cycle 15–25 seconds depending on block format and mix design</li> <li>PLC control with configurable voltage, frequency, and display language</li> <li>Theoretical output: 1800 pcs/h based on 400×200×200mm hollow block (5 pcs/mold, 16–20s cycle)</li> </ul> <p>Configured against your local aggregate and target block format, with mould, pallet, and handling specified as one matched system — not assembled from separate suppliers.</p>
Stationary block machine
Fully Automatic QT5-15 Concrete Block Making Machine | Full Range Manufacturer
<p><strong>QT5-15 Fully Automatic Concrete Block Making Machine, 21MPa Hydraulic Pressure, 1100×550mm Pallet</strong> — bridging small workshop output and high-capacity automatic lines within the full Shiyue range. Platform vibration at 2800–4500 r/min pairs with 21MPa rated pressure to hold block density across hollow, solid and paver formats on a 15–25s cycle.</p> <ul> <li>Machine, mould, pallet and handling specified as one matched system rather than separate suppliers</li> <li>Configuration set against your actual mix design and local aggregate, not a catalogue default</li> <li>Line layout document states the exact block format assumed for each output figure</li> </ul>
Stationary block machine
Concrete Block Molding Machine QTJ4-24 with PLC Control – Manufacturer
<p><strong>QTJ4-24 Stationary Block Making Machine, 45 kN Vibration, PLC Control, 850×450 mm Pallet</strong> — specified together with matching moulds, pallets and handling equipment as one matched stationary system. Integrated 2×3 kW lower and 2×1.5 kW upper vibrators deliver consistent block density across hollow, solid and paving formats, while the 350-type reducer extends mold-lifting service life.</p> <ul> <li>Full-automatic spiral material distribution across the pallet area</li> <li>Semi-automatic configuration with upgrade path to automatic stacking and cubing</li> </ul> <p>Machine, mould, pallet and handling specified as a single matched system — configuration set against your actual mix design and target block format.</p>
Stationary block machine
QTJ4-24 Stationary Block Making Machine – Manufacturer Supply
<p><strong>QTJ4-24 Stationary Block Making Machine, 850×450mm Pallet, 45kN Vibration Force</strong> — mechanical vibration pressing with full-automatic spiral material distribution and 2×3kW lower plus 2×1.5kW upper vibrators, designed for hollow, solid and paving block production at 24–26s molding cycle.</p> <ul> <li>Positioned in the entry-to-mid tier of our stationary block machine range, the QTJ4-24 delivers matched vibration force and pallet size so buyers can calculate real daily output per block format before committing.</li> <li>11.95kW overall power, 350-type reducer for mold lifting, and 2T total mass suit small to medium plants or on-site contractor use.</li> <li>Semi-automatic operation with interchangeable moulds supports format flexibility as your product range grows.</li> </ul> <p>Machine, mould, pallet and handling are specified as one matched system, configured against your local aggregate and target block format — not a catalogue default.</p>
Stationary block machine
QT4-18 Concrete Block Brick Making Machine | Full Range Manufacturer
<p><strong>QT4-18 Stationary Block Machine, 45 kN Vibration, 900×500 mm Pallet</strong> — positioned in the mid-tier of a complete block production range where machine, mould, pallet and handling are specified together. Platform vibration runs at 0–60 Hz with hydraulic demoulding, supporting hollow blocks, solid bricks, pavers and kerbstones on a single press. Output is stated per format with mould cavity count and cycle time made explicit so daily capacity matches your plan. Semi-automatic today, with a clear upgrade path to full automation when volume grows. Line layout and capacity calculation issued with quotation, confirming pallet size, voltage and control language before production starts. <strong>QT4-18 Stationary Block Machine, 45 kN Vibration, 900×500 mm Pallet</strong> — positioned in the mid-tier of a complete block production range where machine, mould, pallet and handling are specified together. Platform vibration runs at 0–60 Hz with hydraulic demoulding, supporting hollow blocks, solid bricks, pavers and kerbstones on a single press. Output is stated per format with mould cavity count and cycle time made explicit so daily capacity matches your plan. Semi-automatic today, with a clear upgrade path to full automation when volume grows. Line layout and capacity calculation issued with quotation, confirming pallet size, voltage and control language before production starts.</p> <p><strong>QT4-18 Stationary Block Machine, 45 kN Vibration, 900×500 mm Pallet</strong> — sits in the mid-tier of a matched block production range where press, mould, pallet and handling are specified as one system. Platform vibration is adjustable 0–60 Hz with hydraulic demoulding, covering hollow blocks, solid bricks, pavers and kerbstones on a single machine. Output figures state the block format, mould cavity count and cycle time behind each number so daily capacity is honest. Semi-automatic now, with a defined path to full automation when output grows. Machine, mould and pallet are matched to your mix design and local aggregate, not pulled from a catalogue default.</p>
Stationary block machine
QTJ4-24 Stationary Block Machine for Hollow Block – Full Range
<p><strong>QTJ4-24 Stationary Block Making Machine, 850×450mm Pallet, 11.95kW, 45kN Vibration Force</strong> — mechanical-vibration press positioned between entry-level mobile machines and full hydraulic automatic lines, offering a clear step-up path for first-plant buyers.</p> <ul> <li>Dual upper and lower vibrators ensure block density and dimensional consistency across hollow and solid formats.</li> <li>Full-automatic spiral feeder delivers uniform material distribution into the mold cavity.</li> <li>350-type reducer for mold lifting extends service life under continuous operation.</li> </ul> <p>Specified as a matched system with pallet, mould and handling — not assembled from separate suppliers.1</p>
Stationary block machine
QTF3-20 Automatic Hydraulic Cement Concrete Block Machine – Full Range
<p><strong>QTF3-20 Stationary Block Making Machine, 17.5 kW, Hydraulic Drive</strong> — positioned in the semi-automatic tier of the Shiyue range, this model balances platform vibration with hydraulic pressure for multi-format production. Double-layer feeding supports both standard and color surface pavers in one cycle, while a compact footprint suits first-time plant setups or replacement machines.</p> <ul> <li>Mould compatibility: hollow blocks, interlock bricks, color pavers, porous bricks, and standard bricks</li> <li>Line pairs with JQ350 mixer and 8-meter conveyor for a simple production layout</li> </ul> <p>Specified as a matched system with line layout, capacity calculation per block format, and electrical confirmation before production.</p>
Stationary block machine
QTJ4-24 Semi Automatic Cement Block Machine – Full Range Manufacturer
<p><strong>QTJ4-24 Semi-Automatic Cement Block Making Machine, 850×450mm Pallet, 45kN Vibration</strong> — positioned in the semi-automatic tier of our stationary range, this model pairs mechanical vibration forming with full-automatic spiral material distribution for uniform cavity filling. The 2×3kW lower and 2×1.5kW upper vibrators deliver consistent block density, while the 350-type reducer extends mold-lifting service life. Ideal for first-time plant setups or on-site contractors evaluating investment level and footprint before committing to higher automation tiers.</p> <ul> <li>Machine, mould, pallet and handling specified as one matched system — not assembled from separate suppliers</li> <li>Configuration set against your actual mix design and local aggregate, not a catalogue default</li> <li>Automation level selectable, so you can start semi-automatic and expand later</li> </ul>
Stationary block machine
QT8-15 Stationary Block Machine | Full Range
<p><strong>QT8-15 Stationary Block Machine, 37 kW, PLC Control, 950×900 mm Pallet</strong> — positioned in the mid-to-high automatic tier of the full stationary range, bridging semi-automatic workshop output and high-capacity lines.</p> <ul> <li>Platform vibration at 2800–4500 r/min paired with hydraulic pressure to match your mix design and aggregate</li> <li>600 m² plant footprint with automatic feeding and fault-diagnosis PLC for consistent daily runs</li> <li>Molding cycle 15–25 s across hollow, solid, paver and interlocking formats — confirm per-format output before order</li> </ul> <p>Machine, mould, pallet and handling specified as one matched system against your actual block format and local conditions, not a catalogue default.</p>
Stationary block machine
QT6-15 Fully Automatic Block Making Machine | Manufacturer
<p><strong>QT6-15 Stationary Block Machine, 37 kW, PLC Touch Screen, 880×850 mm Pallet</strong> — positioned in the mid-to-high tier of the Shiyue range for plants moving beyond semi-automatic output.</p> <ul> <li>Hydraulic pressure and 45 kN platform vibration at 0-60 Hz matched to pallet size for consistent block density across hollow blocks, solid bricks, and pavers</li> <li>Moulding cycle 15-20 s for hollow blocks and 20-25 s for pavers, with each output figure tied to a specific block format</li> <li>Independent hydraulic station isolated from dust and press vibration to protect reliability over long shifts</li> </ul> <p>Configuration set against your actual mix design and local aggregate, with voltage, frequency, and PLC language confirmed before shipment.</p>
Engineered for global performance.
European Design
Airbag systems & 4 vibration motors for higher density
108+ Countries
Trusted exports across Africa, MENA, Asia, LATAM
Full Customization
320+ engineers tailor solutions to local materials
Fast Delivery
In-stock models ship within 15-30 days
Can't find the right model?
Tell us your block size, daily capacity, raw materials and voltage. Our engineers will design a tailored solution within 24 hours.