Shop Concrete Block Machines & Production Lines
Browse our complete range of automatic, mobile, and stationary block machines. European design with airbag systems and four vibration motors — engineered for higher density and lower noise.
All Products
1503 products found
Stationary block machine
Full Range Stationary Block Machine – QTJ4-24 PLC Controlled
<p><strong>QTJ4-24 Stationary Concrete Block Making Machine, 45 kN Vibration, 850×450 mm Pallet</strong> — mechanical press with full-automatic spiral material distribution for hollow and solid block production.</p> <ul> <li>The QTJ4-24 sits in the entry-to-mid tier of our stationary range, where vibration force and pallet size are specified alongside mould format to match your local aggregate and target block type.</li> <li>Mould, pallet, and handling are configured as one system rather than sourced separately.</li> <li>Machine, mould and pallet are supplied as a matched set, with capacity calculated per your actual block format and daily output target.</li> </ul>
Stationary block machine
Hydraulic Automatic Concrete Block Making Machine | Manufacturer
<p><strong>QT4-18 Hydraulic Automatic Concrete Block Making Machine</strong>, 45KN vibration force, 0-60Hz platform vibration, 900×500mm pallet — mid-tier stationary block machine with PLC control and 18-25s molding cycle.</p> <ul> <li>Positioned between entry-level semi-automatic and high-capacity lines, this model suits buyers matching hydraulic pressure and vibration to their mix design and local aggregate for consistent block density</li> <li>Pallet size specifiable against your existing curing area and forklift setup</li> </ul> <p>Every capacity figure is tied to a specific mould, cycle time and block dimension — machine, mould and pallet specified as one matched system from a single source.</p>
Stationary block machine
QTF3-20 Stationary Block Machine | Manufacturer Full Range
<p><strong>QTF3-20 Stationary Block Machine, Semi-Automatic, Hydraulic & Platform Vibration</strong> — a mid-range stationary press designed for buyers who need format versatility without full-automation investment.</p> <ul> <li>Double-layer feeding supports both standard blocks and color-face pavers on one machine</li> <li>Platform vibration with non-contact proximity switches for consistent density across formats</li> <li>Frame built from #12 U-bar welding for vibration resistance and long service life</li> </ul> <p>Specified as a matched system covering machine, mould, pallet and line equipment — so cycle times, block format and local aggregate are aligned before production starts.</p>
Stationary block machine
QTJ4-24 Semi Automatic Cement Block Machine | Full Range
<p>Configuration matched to your local aggregate and target block format, not a catalogue default, with mould, pallet and handling specified as one system.</p>
Stationary block machine
QT8-15 Automatic Stationary Concrete Block Making Machine | Full Range62
<p><strong>QT8-15 Automatic Stationary Concrete Block Making Machine, 37 kW, 950×900 mm Pallet</strong> — configured as one matched system with mould, pallet and handling specified together rather than sourced separately.</p> <ul> <li>Platform vibration with adjustable 2800–4500 r/min frequency range suits different block formats and mix designs</li> <li>Computer-based fault diagnosis with long-distance monitoring keeps the press running without constant manual oversight</li> <li>Pallet size and factory area of 600 m² confirmed before order to match your existing curing layout and forklift</li> </ul> <p>Cycle time and daily output are calculated per your target block format — not quoted against a catalogue default you will never produce.</p>
Stationary block machine
QT6-15 Stationary Block Machine for Hollow Paver | Full Range
<p><strong>QT6-15 Stationary Block Machine, 37 kW, 880×850 mm Pallet, PLC Control</strong> — positioned in the mid-to-high tier of our stationary range for buyers scaling from workshop output to a dedicated block plant. Hydraulic pressure and platform vibration at 45 kN are matched to your mix design and local aggregate, with pallet size selected around your existing curing area and forklift. Output capacity is stated per block format with cycle time, so daily production matches the product you actually sell.</p> <ul> <li>Machine, mould, pallet and handling specified as one matched system rather than separate suppliers</li> <li>Configuration set against your actual raw material and target block format, not a catalogue default</li> <li>Factory test record documents cycle time and block quality per format before shipment</li> </ul>
Stationary block machine
QT12-15 Stationary Block Machine for Hollow Solid Paver – Full Range
<p><strong>QT12-15 Fully Automatic Stationary Block Making Machine, 44.58 kW, 16–21 MPa Hydraulic Pressure, 1300×900 mm Pallet</strong> — configured for hollow, solid and paver formats with platform synchronization vibration adjustable per block type.</p> <ul> <li>Output capacity stated per format: 21,600 pcs/day based on 400×200×200 mm hollow block (12 pcs/mould, 20–25s cycle)</li> <li>Computer fault diagnosis system with warning signals for rapid troubleshooting</li> <li>Supports crushed stone, sand, fly ash, slag and gravel mix designs</li> </ul> <p>Sits at the top of the stationary range, helping buyers place this tier against semi-automatic and smaller models before narrowing to a full plant layout. Machine, mould, pallet and handling are specified as one matched system rather than assembled from separate suppliers, with configuration set against your actual mix design and target block format.</p>
Stationary block machine
QT10-15 Stationary Concrete Block Making Machine with PLC Control – Factory Supply
<p><strong>QT10-15 Stationary Block Machine, PLC Control, Fully Automatic</strong> — positioned in the high-capacity tier of Shiyue's stationary range for buyers comparing output levels across automatic, semi-automatic and mobile options.</p> <ul> <li>Output stated per block format with matching cycle time, so daily expectations are realistic from day one</li> <li>Independent hydraulic station isolated from vibration and dust; quick mould-change design covers hollow block, solid brick and paving block on one press</li> </ul> <p>Machine, mould, pallet and handling specified as one matched system rather than assembled from separate suppliers, with configuration set against your local aggregate and target format.</p>
Stationary block machine
Full Range Automatic Concrete Block Making Machine – QT5-15
<p><strong>QT5-15 Automatic Concrete Block Making Machine, 21 MPa Hydraulic Pressure, Platform Vibration 2800–4500 r/min, 1100×550 mm Pallet</strong> — positioned in the mid-tier of our stationary block machine range for buyers scaling up from semi-automatic or entry-level lines.</p> <ul> <li>Output capacity stated per block format: hollow, solid, paver, and interlocking options supported on a single press with moulding cycle 15–25 s</li> <li>Vibration frequency adjustable across mix designs; hydraulic demolding delivers consistent block density</li> <li>Mid-range footprint suits first-plant entrepreneurs and contractors adding formats to existing production</li> </ul> <p>Every configuration starts from your actual mix design and target block format, not a catalogue default — machine, mould, pallet and handling specified as one matched system.</p>
Stationary block machine
QT4-18 Stationary Block Machine – Full Range
<p><strong>QT4-18 Semi-Automatic Concrete Block Making Machine, 40–50 kN Vibration Force, 24 kW</strong> — positioned in SHIYUE's full range as an entry-tier stationary block machine for first-time plants and on-site contractors. Molding cycle runs 15–25 s across hollow block, solid brick, paver, and curbstone formats on an 850×550×25 mm pallet, with vibration and pressure matched to your local aggregate and mix design.</p> <ul> <li>Capacity figures quoted per block format — no unqualified cycle-rate claims</li> <li>Machine, mould, pallet, and handling specified as one matched system</li> <li>Factory test record and packing photographs provided before shipment</li> </ul>
Stationary block machine
QTJ4-24 Semi-Automatic Block Making Machine – Manufacturer Full Range
<p><strong>QTJ4-24 Semi-Automatic Block Making Machine, 45kN Vibration, 850×450mm Pallet</strong> — positioned within SHIYUE's stationary range for buyers entering block production or replacing older equipment without a full-autom...</p>
Stationary block machine
QTJ4-40 Semi-Automatic Block Making Machine | Full Range
<p><strong>QTJ4-40 Semi-Automatic Block Making Machine, 10.4kW, 850×450×20mm Pallet</strong> — positioned in the entry semi-automatic tier of the Shiyue stationary range, suited to first-time plants and on-site contractors comparing footprint and investment before stepping to higher-output automatic lines. Vibration force and hydraulic pressure are matched to your local aggregate and target block format, with mould options for hollow, solid and paver sizes. Configuration is set against your actual mix design and site conditions, not a catalogue default.</p> <ul> <li>Molding cycle 40s, pallet size 850×450×20mm, net weight 1.2T</li> <li>Mould compatibility: 8 / 6 / 5 / 4 inch hollow, solid and paver blocks</li> <li>Compact footprint 1350×1460×1800mm for small-plant or contractor setups</li> </ul>
Engineered for global performance.
European Design
Airbag systems & 4 vibration motors for higher density
108+ Countries
Trusted exports across Africa, MENA, Asia, LATAM
Full Customization
320+ engineers tailor solutions to local materials
Fast Delivery
In-stock models ship within 15-30 days
Can't find the right model?
Tell us your block size, daily capacity, raw materials and voltage. Our engineers will design a tailored solution within 24 hours.