Shop Concrete Block Machines & Production Lines
Browse our complete range of automatic, mobile, and stationary block machines. European design with airbag systems and four vibration motors — engineered for higher density and lower noise.
All Products
1498 products found
Stationary block machine
QT6-15 Stationary Block Machine for Hollow Paver | Full Range
<p><strong>QT6-15 Stationary Block Machine, 37 kW, 880×850 mm Pallet, PLC Control</strong> — positioned in the mid-to-high tier of our stationary range for buyers scaling from workshop output to a dedicated block plant. Hydraulic pressure and platform vibration at 45 kN are matched to your mix design and local aggregate, with pallet size selected around your existing curing area and forklift. Output capacity is stated per block format with cycle time, so daily production matches the product you actually sell.</p> <ul> <li>Machine, mould, pallet and handling specified as one matched system rather than separate suppliers</li> <li>Configuration set against your actual raw material and target block format, not a catalogue default</li> <li>Factory test record documents cycle time and block quality per format before shipment</li> </ul>
Stationary block machine
QT12-15 Stationary Block Machine for Hollow Solid Paver – Full Range
<p><strong>QT12-15 Fully Automatic Stationary Block Making Machine, 44.58 kW, 16–21 MPa Hydraulic Pressure, 1300×900 mm Pallet</strong> — configured for hollow, solid and paver formats with platform synchronization vibration adjustable per block type.</p> <ul> <li>Output capacity stated per format: 21,600 pcs/day based on 400×200×200 mm hollow block (12 pcs/mould, 20–25s cycle)</li> <li>Computer fault diagnosis system with warning signals for rapid troubleshooting</li> <li>Supports crushed stone, sand, fly ash, slag and gravel mix designs</li> </ul> <p>Sits at the top of the stationary range, helping buyers place this tier against semi-automatic and smaller models before narrowing to a full plant layout. Machine, mould, pallet and handling are specified as one matched system rather than assembled from separate suppliers, with configuration set against your actual mix design and target block format.</p>
Stationary block machine
QT10-15 Stationary Concrete Block Making Machine with PLC Control – Factory Supply
<p><strong>QT10-15 Stationary Block Machine, PLC Control, Fully Automatic</strong> — positioned in the high-capacity tier of Shiyue's stationary range for buyers comparing output levels across automatic, semi-automatic and mobile options.</p> <ul> <li>Output stated per block format with matching cycle time, so daily expectations are realistic from day one</li> <li>Independent hydraulic station isolated from vibration and dust; quick mould-change design covers hollow block, solid brick and paving block on one press</li> </ul> <p>Machine, mould, pallet and handling specified as one matched system rather than assembled from separate suppliers, with configuration set against your local aggregate and target format.</p>
Stationary block machine
Full Range Automatic Concrete Block Making Machine – QT5-15
<p><strong>QT5-15 Automatic Concrete Block Making Machine, 21 MPa Hydraulic Pressure, Platform Vibration 2800–4500 r/min, 1100×550 mm Pallet</strong> — positioned in the mid-tier of our stationary block machine range for buyers scaling up from semi-automatic or entry-level lines.</p> <ul> <li>Output capacity stated per block format: hollow, solid, paver, and interlocking options supported on a single press with moulding cycle 15–25 s</li> <li>Vibration frequency adjustable across mix designs; hydraulic demolding delivers consistent block density</li> <li>Mid-range footprint suits first-plant entrepreneurs and contractors adding formats to existing production</li> </ul> <p>Every configuration starts from your actual mix design and target block format, not a catalogue default — machine, mould, pallet and handling specified as one matched system.</p>
Stationary block machine
QT4-18 Stationary Block Machine – Full Range
<p><strong>QT4-18 Semi-Automatic Concrete Block Making Machine, 40–50 kN Vibration Force, 24 kW</strong> — positioned in SHIYUE's full range as an entry-tier stationary block machine for first-time plants and on-site contractors. Molding cycle runs 15–25 s across hollow block, solid brick, paver, and curbstone formats on an 850×550×25 mm pallet, with vibration and pressure matched to your local aggregate and mix design.</p> <ul> <li>Capacity figures quoted per block format — no unqualified cycle-rate claims</li> <li>Machine, mould, pallet, and handling specified as one matched system</li> <li>Factory test record and packing photographs provided before shipment</li> </ul>
Stationary block machine
QTJ4-24 Semi-Automatic Block Making Machine – Manufacturer Full Range
<p><strong>QTJ4-24 Semi-Automatic Block Making Machine, 45kN Vibration, 850×450mm Pallet</strong> — positioned within SHIYUE's stationary range for buyers entering block production or replacing older equipment without a full-autom...</p>
Stationary block machine
QTJ4-40 Semi-Automatic Block Making Machine | Full Range
<p><strong>QTJ4-40 Semi-Automatic Block Making Machine, 10.4kW, 850×450×20mm Pallet</strong> — positioned in the entry semi-automatic tier of the Shiyue stationary range, suited to first-time plants and on-site contractors comparing footprint and investment before stepping to higher-output automatic lines. Vibration force and hydraulic pressure are matched to your local aggregate and target block format, with mould options for hollow, solid and paver sizes. Configuration is set against your actual mix design and site conditions, not a catalogue default.</p> <ul> <li>Molding cycle 40s, pallet size 850×450×20mm, net weight 1.2T</li> <li>Mould compatibility: 8 / 6 / 5 / 4 inch hollow, solid and paver blocks</li> <li>Compact footprint 1350×1460×1800mm for small-plant or contractor setups</li> </ul>
Stationary block machine
QT5-15 Automatic Concrete Block Making Machine | Full Range14
<p><strong>QT5-15 Automatic Concrete Block Making Machine, 21MPa Hydraulic Pressure, 2800–4500 r/min Vibration</strong> — configured as a mid-tier stationary block machine within the full Shiyue range. Platform vibration paired with matched hydraulic pressure ensures block strength aligns with your local aggregate and mix design. Pallet size 1100×550mm and cycle time stated per block format so daily output stays realistic.</p> <ul> <li>Mould and machine specified as one matched system, not assembled from separate suppliers</li> <li>Line layout document states the exact block format behind every capacity figure</li> <li>Factory test record validates cycle time and strength against your mix before shipment</li> </ul>
Stationary block machine
QT5-15 Automatic Hydraulic Concrete Block Making Machine | Full Range
<p><strong>QT5-15 Stationary Block Machine, 21MPa Hydraulic Pressure, 1100×550mm Pallet, 26.5kW</strong> — positioned in the mid-to-high automatic tier of the Shiyue range, this model pairs platform vibration at 2800–4500 r/min with hydraulic demolding to handle hollow blocks, pavers and curbstones across standard output tiers.</p> <ul> <li>Output capacity stated per block format with molding cycle assumptions</li> <li>Full machine, mould, pallet and handling specified as one matched system</li> <li>Factory test record and capacity calculation included before dispatch</li> </ul>
Stationary block machine
QTJ4-24 Automatic Stationary Block Machine – Full Range
<p><strong>QTJ4-24 Stationary Block Machine, 850×450mm Pallet, 45kN Vibration Force</strong> — positioned in the entry tier of our stationary range, this model pairs dual-level vibration with mechanical molding for consistent block density across hollow and solid formats.</p> <ul> <li>Molding cycle 24–26s, full-automatic spiral material distribution</li> <li>350-type reducer for mold lifting, 11.95kW total power</li> <li>Pallet size and curing layout confirmed against your site before shipment</li> </ul> <p>Every machine ships with a format-specific capacity sheet, matched mould drawings, and operator training at commissioning — so your daily output aligns with the original proposal.</p>
Stationary block machine
Block Manufacturing Machine QTJ4-40 for Hollow Bricks | Full Range
<p><strong>QTJ4-40 Semi-Automatic Block Making Machine, 10.4 kW, 40 s Molding Cycle, Dual Vibration System</strong> — positioned in the entry-to-mid tier of stationary block machines, this model balances vibration force with hydraulic compression to deliver consistent density across hollow, solid and paver formats on a single host. Semi-automatic operation keeps investment manageable while preserving a clear upgrade path. Moulds, pallets and line layout are specified as one matched system against your local aggregate and target block format.</p> <ul> <li>Output: 360 pcs/h based on 400×200×200 mm hollow block, 4 pcs/mould</li> <li>Pallet size: 850×450×20 mm</li> <li>Voltage configured to buyer's local supply before shipment</li> </ul>
Stationary block machine
QT7-15 Interlocking Brick Machine with Hollow Block – Factory Supply
<p>Machine, mould and pallet engineered as one matched system rather than sourced separately, with capacity calculations stated per block format and installation support included.</p>
Engineered for global performance.
European Design
Airbag systems & 4 vibration motors for higher density
108+ Countries
Trusted exports across Africa, MENA, Asia, LATAM
Full Customization
320+ engineers tailor solutions to local materials
Fast Delivery
In-stock models ship within 15-30 days
Can't find the right model?
Tell us your block size, daily capacity, raw materials and voltage. Our engineers will design a tailored solution within 24 hours.