Shop Concrete Block Machines & Production Lines
Browse our complete range of automatic, mobile, and stationary block machines. European design with airbag systems and four vibration motors — engineered for higher density and lower noise.
All Products
1494 products found
Clay interlocking brick
ECO 2700 Clay Interlocking Brick Machine – Full Range
<p><strong>ECO 2700 Clay Interlocking Brick Machine, 5.5 kW, 16 MPa Hydraulic Pressure</strong> — positioned in the entry-level tier of the full block machine range, this unit suits first-time brick plants and on-site production where a compact 1000×1000×1800 mm footprint and 15–20 second shaping cycle meet daily demand without a fixed facility.</p> <ul> <li>Shaping cycle: 15–20 seconds</li> <li>Rated power: 5.5 kW</li> <li>Hydraulic pressure: 16 MPa</li> <li>Voltage: 380V, 3-phase, 50Hz (customizable)</li> </ul> <p>Capacity calculations are provided per block format so expectations match reality, and machine, mould and pallet are specified as one matched system rather than sourced separately.</p>
Stationary block machine
QT10-15 Automatic Block Machine with PLC Control – Full Range
<p><strong>QT10-15 Stationary Automatic Block Making Machine, Siemens PLC Control, 1100×900mm Molding Area, 100 kN Vibration</strong> — fully integrated line with batching, mixing, pallet feeder and SY-8 stacker specified as one matched system. Vibration frequency (2800–4500 cycles/min) and hydraulic pressure configured to your mix design and local aggregate, with mould carburized to 54–58 HRC for extended service life.</p> <ul> <li>Mould formats cover hollow, solid, paving and interlocking blocks, with custom design available to your drawings</li> <li>Voltage, frequency and PLC display language confirmed before production to avoid commissioning delays</li> </ul> <p>Every machine, mould, pallet and handling station is specified as a single coordinated system rather than assembled from separate suppliers.</p>
Stationary block machine
QTJ4-24 Semi Automatic PLC Controlled Cement Block Machine – Full Range87
<p><strong>QTJ4-24 Semi-Automatic Cement Block Making Machine, 850×450mm Pallet, 11.95kW, PLC Controlled</strong> — positioned in the semi-automatic tier of Shiyue's stationary range, bridging small workshop output and higher-capacity automatic lines.</p> <ul> <li>Mechanical molding with 45 kN vibration force and upper + lower vibrators matched to cement, sand and stone mixes</li> <li>350-type reducer for mold lifting and full-automatic spiral material distribution</li> <li>Pallet size, voltage and control language confirmed before shipment to avoid commissioning delays</li> </ul>
Stationary block machine
QTJ4-24 Stationary Block Making Machine – Full Range
<p><strong>QTJ4-24 Stationary Block Making Machine, 850×450 mm Pallet, 11.95 kW, Semi-Automatic PLC Control</strong> — positioned within SHIYUE's full stationary range to help buyers compare semi-automatic, automatic, and mobile tiers by output level, investment, and plant footprint. Vibration force of 45 kN paired with upper and lower vibrators ensures consistent block density, while the 350-type mold lifting reducer extends service intervals. Cycle time runs at 24–26 s across hollow, solid, and paving formats on matched pallets.</p> <ul> <li>Line layout and capacity calculation provided per confirmed block format before order</li> <li>Voltage, frequency, and PLC display language verified ahead of production</li> <li>Factory test record and packing photos shared before dispatch</li> </ul>
Stationary block machine
QT5-15 Hydraulic PLC Controlled Block Machine – Manufacturer Full Range
<p><strong>QT5-15 Stationary Block Machine, 21MPa Hydraulic Pressure, PLC Controlled</strong> — positioned in the mid-tier automatic range, this press pairs adjustable platform vibration (2800–4500 r/min) with hydraulic demolding for consistent block density across hollow blocks, pavers and interlocking formats on a 1100×550mm pallet. Gear-driven mechanism reduces mechanical play over extended shifts. Output capacity stated per block format, not a single headline figure.</p> <ul> <li>Machine, mould, pallet and handling specified as one matched system against your actual mix design and local aggregate</li> <li>Configuration confirmed against your target block format, site conditions and voltage requirement before production</li> <li>Factory test record provided showing cycle time and block strength verified with your raw material</li> </ul>
Stationary block machine
Automatic Concrete Block Machine for Hollow Block – Manufacturer
<p><strong>QT5-15 Fully Automatic Hydraulic Block Making Machine, 21 MPa Rated Pressure, 1100×550 mm Pallet</strong> — configured within Shiyue's mid-tier stationary range for buyers surveying output tiers before narrowing down.</p> <ul> <li>Platform vibration 2800–4500 r/min paired with 21 MPa hydraulic pressure, matched to buyer's mix design and local aggregate</li> <li>Output stated per format: 1800 pcs/h based on 400×200×200 mm hollow brick (5 pcs/mold, 16–20 s cycle), 1300 pcs/h for 400×150×200 mm block, 3700 pcs/h for S paver</li> <li>15–25 s molding cycle across hollow, solid, paver and interlocking formats on one press</li> </ul> <p>Supplied as a matched system of press, mould, pallet and handling — line layout and capacity calculation document provided per buyer's actual product mix.</p>
Stationary block machine
Concrete Block Making Machine QT4-18 – Full Range Manufacturer
<p><strong>QT4-18 Semi-Automatic Stationary Block Machine, 24 kW, 850×550 mm Pallet</strong> — positioned at the entry-to-mid tier of the Shiyue range for buyers mapping investment against plant footprint.</p> <ul> <li>Dual vibration (bed mould vertical + upper mould compression) paired with hydraulic station keeps block density uniform across hollow, solid, paver and curbstone formats</li> <li>15-25 s molding cycle with included mixer, conveyor and automatic stacker forms a complete line without full-automation cost</li> </ul> <p>Specification, mould drawing and capacity calculation are issued per block format before production, so output assumptions are verified against your local mix and curing setup.</p>
Stationary block machine
QTJ4-24 Concrete Block Making Machine | Full Range
<p><strong>QTJ4-24 Stationary Block Machine, 45 kN Vibration, 850×450 mm Pallet, 11.95 kW</strong> — mechanical molding with full-automatic spiral material distribution and four-motor vibration (2×3 kW lower, 2×1.5 kW upper) for consistent block density across hollow, solid, interlocking and paving formats. Semi-automatic operation keeps power demand and footprint suited to entry-level plants or on-site contractor use.</p> <ul> <li>Capacity calculation provided per specific block format, not a generic cycle claim</li> <li>Machine, mould and pallet specified as one matched system for your local mix design</li> <li>Voltage, frequency and PLC language confirmed before production begins</li> </ul>
Stationary block machine
QTJ4-24 Block Making Machine for Hollow Block – Full Range
<p><strong>QTJ4-24 Stationary Block Making Machine, 11.95 kW, 850×450 mm Pallet</strong> — mechanical vibration with full-automatic spiral material distribution for hollow and solid block production. Dual-level vibration (45 kN total) ensures consistent block density, while the 350-type reducer on mold lifting extends service life. Compact 3600×1700×2560 mm footprint fits small-to-medium plant layouts without sacrificing output tier. Positioned in the entry-to-mid range, this model suits first-plant buyers or contractors producing blocks on-site. Machine, mould, pallet and handling specified as one matched system rather than assembled from separate suppliers.</p>
Stationary block machine
Cement Brick Block Making Machine with PLC Control – Full Range54
<p>Machine, mould and pallet specified as one matched system against your local aggregate and target block format, not a catalogue default.</p>
Stationary block machine
QT4-18 Concrete Block Making Machine for Hollow Block – Full Range
<p><strong>QT4-18 Stationary Block Machine, 900×500 mm Pallet, 0-60 Hz Platform Vibration</strong> — hydraulic demolding with PLC interlocking control for consistent block release across hollow and solid formats.</p> <p>Positioned in the mid-tier of our full range, this model balances output and footprint for first-plant buyers or site contractors adding format flexibility. Vibration force and hydraulic pressure are configured against your local aggregate and mix design rather than a catalogue default.</p> <ul> <li>45 kN vibration force matched to block format and mix</li> <li>18-25 s molding cycle depending on block size</li> <li>Semi-automatic operation with upgrade path available</li> </ul> <p>Every capacity figure is tied to a specific block size and mould count so expectations match reality on the production floor.</p>
Stationary block machine
QTJ4-24 Stationary Block Making Machine for Hollow Paving Brick – Full Range
<p><strong>QTJ4-24 Stationary Block Making Machine, 850×450 mm Pallet, 45 kN Vibration</strong> — semi-automatic mechanical molding with dual-level vibration and full-automatic spiral feeding for hollow, solid, and paving block production.</p> <p>This tier suits first-plant buyers and site contractors matching vibration force to local mix design. The 350-type reducer dedicated to mold lifting extends service life under continuous operation.</p> <p>Line layout, capacity per format, voltage, and PLC language are confirmed before production — not after arrival.</p> <ul> <li>Model: QTJ4-24</li> <li>Molding Cycle: 24–26 s</li> <li>Overall Power: 11.95 kW</li> <li>Total Mass: 2 T</li> </ul>
Engineered for global performance.
European Design
Airbag systems & 4 vibration motors for higher density
108+ Countries
Trusted exports across Africa, MENA, Asia, LATAM
Full Customization
320+ engineers tailor solutions to local materials
Fast Delivery
In-stock models ship within 15-30 days
Can't find the right model?
Tell us your block size, daily capacity, raw materials and voltage. Our engineers will design a tailored solution within 24 hours.