Shop Concrete Block Machines & Production Lines
Browse our complete range of automatic, mobile, and stationary block machines. European design with airbag systems and four vibration motors — engineered for higher density and lower noise.
Automatic block machine
262 products found
Automatic block machine
Qt10-15 Automatic Concrete Block Making Machine | Manufacturer58
<p><strong>Qt10-15 Automatic Concrete Block Making Machine, 21 MPa rated pressure, 1100×900 mm pallet, 60 kN vibration force</strong> — positioned in the high-capacity tier of the Shiyue automatic range, with platform vibration frequency adjustable across 2800–4500 r/min to match your local aggregate and mix design rather than a catalogue default. The PLC-controlled fully automatic line includes person-machine conversation interface for batch consistency and reduced operator dependency. Shiyue specifies the machine, mould, pallet and handling as one matched system, confirmed against your actual block format and site conditions before production begins</p> <p>6</p>
Automatic block machine
QT14-15 Automatic Block Making Machine for Hollow Block – Manufacturer
Matched System Sizing — the QT14-15 is specified as one coordinated line of press, mould, pallet and handling, keeping output tiers and plant footprint aligned for high-capacity buyers. Technical Specifications Parameter Value Model QT14-15 Product Type Automatic Concrete Block Making Machine Vibration Mode Multiaxis synchronizer vibration, vertically downward Guide System Long-period over-length guide bearing for […]
Automatic block machine
Qt4 25 Vibration Motor Brick Block Making Machine | Full Range
<p><strong>QTJ4-25 Semi-Automatic Block Machine, 17kW, 21MPa Rated Pressure</strong> — positioned at the entry-level tier of the range for first-time plant setups or small-volume replacement lines. Output varies by block format, from hollow blocks to pavers on an 850×480mm pallet, with 1–2 operators required. Moulds, pallet and handling are specified as one matched system rather than sourced separately. Configuration is set against your actual mix design and local aggregate, not a catalogue default.</p>
Automatic block machine
QT4-20 Automatic Block Machine | Full Range Manufacturer
<p><strong>QT4-20 Automatic Block Machine, 21 MPa Pressure, 60 kN Vibration, 1020×570 mm Pallet</strong> — configured with platform vibration at 2800–4500 r/min and hydraulic demolding for consistent density across hollow blocks, solid blocks, pavers, and interlocking formats.</p> <ul> <li>PLC-controlled automatic line with person-machine conversation interface</li> <li>500 m² plant footprint, 27.5 kW overall power</li> <li>Mould, pallet, and handling specified as one matched system</li> </ul> <p>Capacity calculations provided per block format assumed, with machine, mould, and pallet engineered together against your local aggregate and target product.115</p>
Automatic block machine
QT10-15 Automatic Block Making Machine for Cement Blocks – Full Range Manufacturer
<p><strong>QT10-15 Automatic Block Making Machine, PLC Control, Vertical Vibration</strong> — positioned within Shiyue's full automatic range so you can compare output tiers, investment level and plant footprint before committing to a configuration.</p> <ul> <li>Cycle time 15–25s depending on block format, with every capacity figure tied to a specific mould count and block size</li> <li>Independent hydraulic station isolated from host vibration for long-term reliability</li> <li>Multi-format production from hollow blocks to interlocking pavers through mould replacement</li> </ul> <p>Specified as one matched system covering machine, mould, pallet and handling equipment, with line layout and capacity calculation documents provided before order confirmation.</p>
Automatic block machine
ECO2700 Houdie Manual Interlock Brick Machine – Full Range
<p><strong>Manual Interlocking Block Making Machine</strong>, hydraulic press forming, 10-15s cycle, dual mould compatibility for 250×125×100mm and 300×150×100mm interlock formats. Output stated per mould: 240 pcs/hour for each listed format, based on an 8-hour shift.</p> <p>Sits at the entry tier of our block machine range — ideal for buyers surveying investment levels and plant footprint before stepping up to semi-automatic or automatic lines. Compact 1600×1300×2400mm frame and 900KGS weight allow flexible on-site or workshop placement with only 1-2 operators.</p> <p>Machine, mould and pallet specified as one matched system against your actual mix design and target block format — not a catalogue default.</p>
Automatic block machine
QT5-15 Automatic Concrete Block Making Machine | Full Range
<p><strong>QT5-15 Full Automatic Concrete Block Making Machine</strong>, 31.5KW host power, 1050×500mm molding area, Siemens PLC control — positioned in the mid-tier of our complete block machine range to help buyers compare output tiers and plant footprint before committing.</p> <ul> <li>Hydraulic + platform vibration at 55KN force, 2800–4500 cycles/min, matched to pallet size 1100×550mm</li> <li>Grouped line: PLD1200 batching, JS500 mixer, SY-4 stacker included as one system</li> <li>Mould heat-treated to 54–58 HRC for extended service life across hollow, solid, paving, and interlocking formats</li> </ul> <p>We configure each line against your local aggregate and target block format, not a catalogue default, and confirm voltage and PLC language before production.</p>
Automatic block machine
QT5-15 Automatic Concrete Interlocking Bricks Making Machine | Manufacturer
<p><strong>QT5-15 Automatic Concrete Block Making Machine, 80 kN Vibration Force, 1100×550mm Pallet</strong> — positioned in the mid-output tier of Shiyue's full automatic range, this press uses platform vibration at 0-60Hz matched with an independent hydraulic station to hold consistent density across hollow blocks, solid bricks, and interlocking pavers. PLC control coordinates pallet feeding, material dosing, vibration, and demoulding in one cycle.</p> <ul> <li>Output capacity stated per block format — no unverified cycles-per-hour claims</li> <li>Mould change enables format flexibility within a single machine footprint</li> </ul> <p>Every machine is configured against your actual mix design and local aggregate, with line layout and capacity calculation delivered before order confirmation.</p>
Automatic block machine
QT5-15 Interlocking Brick Making Machine | Full Range
<p><strong>QT5-15 Interlocking Brick Making Machine, 80 kN Vibration Force, PLC Control</strong> — positioned in the mid-tier automatic range, this model bridges small workshop machines and high-capacity lines. Platform vibration spans 0-60 Hz with independent hydraulic station, producing hollow blocks, solid bricks and pavers through mould changes on 1100×550 mm pallets.</p> <ul> <li>Machine, mould and handling specified as one matched system</li> <li>Configuration set against your actual mix design and local aggregate</li> <li>Automation level selectable with future upgrade path available</li> </ul>
Automatic block machine
QT4-15 Hollow Block Making Machine | Full Range Manufacturer
<p><strong>QT4-15A Fully Automatic Concrete Block Making Machine, 16–21 MPa, 55 kN Vibration, 880×550mm Pallet</strong> — positioned in the mid-tier automatic range, bridging small workshop setups and high-capacity production lines for buyers mapping their investment level.</p> <ul> <li>Platform vibration at 4200 r/min paired with hydraulic demolding covers hollow, solid and paver formats</li> <li>4 T total mass with 300 m² factory area defines a manageable footprint for first-plant buyers</li> <li>Cycle time and daily output confirmed per target block format before quotation</li> </ul> <p>Configured against your actual mix design and local aggregate, with mould and pallet specified as one matched system rather than separate add-ons.</p>
Automatic block machine
QT5-15 Cement Interlocking Brick Making Machine | Full Range81
<p><strong>QT5-15 Automatic Block Machine, PLC Control, 80 kN Vibration Force, 1100×550 mm Pallet</strong> — positioned in the mid-tier of the Shiyue range, this model covers hollow blocks, solid bricks and interlocking pavers on one platform.</p> <ul> <li>Platform vibration at 0–60 Hz matched with independent hydraulic station for consistent compaction across formats</li> <li>Mould change supports multiple block types; output stated per format with cycle time assumption</li> <li>1000 m² factory area requirement, 32 kW overall power</li> <li>Configuration set against your actual mix design and local aggregate, not a catalogue default, with operator training and ongoing mould support included</li> </ul>
Automatic block machine
QT12-15 Hydraulic Automatic Block Machine for Hollow Block and Solid Brick – Full Range
<p><strong>QT12-15 Automatic Block Machine, 21MPa Hydraulic Pressure, 45.7kW, 1350×850mm Pallet</strong> — engineered for high-volume hollow block and solid brick production across multiple output tiers. Every capacity figure is calculated per specific block format and mould cavity count, so real daily output matches expectation. Machine, mould, pallet and handling equipment specified as one matched system against your local aggregate and mix design, with installation and operator training included.</p>
Engineered for global performance.
European Design
Airbag systems & 4 vibration motors for higher density
108+ Countries
Trusted exports across Africa, MENA, Asia, LATAM
Full Customization
320+ engineers tailor solutions to local materials
Fast Delivery
In-stock models ship within 15-30 days
Can't find the right model?
Tell us your block size, daily capacity, raw materials and voltage. Our engineers will design a tailored solution within 24 hours.