Shop Concrete Block Machines & Production Lines
Browse our complete range of automatic, mobile, and stationary block machines. European design with airbag systems and four vibration motors — engineered for higher density and lower noise.
All Products
1513 products found
High quality block machine
QT4-15 Brick Making Machinery for Concrete Blocks – Manufacturer
<p><strong>QT4-15 Hydraulic Automatic Concrete Block Making Machine, 15-20s cycle, multiaxis vibration</strong> — positioned in the mid-tier of our fully automatic range, this model delivers computer-controlled production with high-strength rack construction engineered to resist continuous vibrating shock.</p> <ul> <li>Output capacity stated per block format: 900-1200 pcs/hour based on 400×200×200mm hollow block, 2880-3840 pcs/hour based on 200×100×60mm paving block</li> <li>Long-period over-length guide bearing ensures accurate upper mould and mould box alignment across production runs</li> <li>Multiaxis forced mixer system adaptable to varying raw material properties and local aggregate sources</li> </ul> <p>Every line layout and capacity calculation we provide states the exact block format assumed, so your investment decision rests on verified output figures rather than catalogue defaults.</p>
High quality block machine
QT10-15 Cement Block Machine | Full Range Manufacturer
<p><strong>QT10-15 Hydraulic Concrete Block Making Machine</strong>, PLC control, independent integrated hydraulic station — positioned in the upper-mid tier of our automatic range. Output capacity is stated per block format with cycle times and mould cavity counts, so daily volume matches the product you actually sell. Independent hydraulic station isolated from vibration ensures long-term reliability across extended runs, while vertical station mode resonance with automatic frequency-amplitude modulation delivers consistent compaction for varying mix designs.</p> <ul> <li>Mould change system supports hollow block, solid brick, paving block and interlocking formats on one press</li> <li>Line layout and capacity calculation provided per format before order confirmation</li> </ul>
High quality block machine
Factory Supply Concrete Block Making Machine for Hollow Block
<p><strong>QT4-15B Fully Automatic Concrete Block Making Machine, Multiaxis Synchronizer Vibration, Computer Controlled</strong> — positioned in Shiyue's mid-tier automatic range for buyers comparing output classes before committing to a full line.</p> <ul> <li>Vibration and hydraulic pressure matched to your mix design and local aggregate</li> <li>Pallet size selected around your existing curing area and forklift setup</li> <li>Mould options for hollow block, solid block, paving block and standard brick formats</li> </ul> <p>Configured as one matched system covering machine, mould, pallet and handling, with capacity calculated per block format rather than quoted as a single cycles-per-hour figure.</p>
High quality block machine
QTJ4-25 Semi-Automatic Concrete Block Machine | Full Range Manufacturer
<p><strong>QTJ4-25 Semi-Automatic Concrete Block Machine, 60 kN Vibration, 25 s Molding Cycle</strong> — specified as one matched system with JQ350 mixer and 850×550×20 mm pallets.</p> <ul> <li>Output stated per format: 3800 hollow blocks or 17000 solid bricks per 8-hour shift</li> <li>Adjustable vibration frequency 2800–5100 r/min matched to your local aggregate and mix design</li> <li>Manual pallet handling with trolley, suitable for first-time plant setup</li> </ul> <p>Every configuration is set against your actual block format and curing conditions, not a catalogue default, with mould drawings and capacity calculations provided before production.</p>
High quality block machine
Full Range Semi Automatic Block Machine – QTJ4-35 Hydraulic Press
<p><strong>QTJ4-35 Semi-Automatic Hydraulic Block Making Machine, 35s Cycle, 30 kN Vibration</strong> — positioned as Shiyue's entry tier for first-time plant owners weighing semi-automatic against higher-investment automatic lines.</p> <ul> <li>Hydraulic station paired with 2800 r/min vibration ensures stable block density across hollow blocks, solid bricks, and pavers</li> <li>Compact 1350×1460×1800 mm footprint fits small workshops or on-site setups</li> <li>Output stated per format: 408 pcs/hr based on 400×200×200 mm hollow block, 2100 pcs/hr based on 240×115×53 mm solid brick</li> </ul> <p>Capacity calculations, voltage confirmation, and mould format lists are provided before production so the line matches your actual mix design and local grid.</p>
High quality block machine
Interlocking Brick Machine with Semi Automatic – Factory Supply
<p><strong>LY2-10 Clay Interlocking Block Making Machine, 7.5 kW, Semi-Automatic, 10 s Molding Cycle</strong> — produces interlocking bricks from clay, soil, cement, or fly ash mixes within a compact 1300×1800×2400 mm footprint. Mould options cover formats including 300×150×100 mm and 250×125×75 mm. As part of the full Shiyue range, this semi-automatic tier lets you compare output levels and automation options before scaling.</p> <ul> <li>Machine, mould, and pallet specified as one matched system against your local aggregate and target format</li> <li>Configuration confirmed against your mix design, not a catalogue default</li> <li>Installation support with operator training included</li> </ul>
High quality block machine
Clay Interlocking Block Machine LY2-10 | Manufacturer Full Range
<p><strong>LY2-10 Clay Interlocking Block Machine, 7.5 kW, Semi-Automatic, 10 s Molding Cycle</strong> — produces interlocking bricks from clay, soil, cement, concrete or fly ash with format-specific output across 300×150×100 mm, 250×125×75 mm and 230×220×115 mm mould options.</p> <ul> <li>Positioned in Shiyue's semi-automatic tier, offering an entry point before stepping up to higher-capacity automatic lines within the same range.</li> <li>Mould formats and hydraulic pressure matched to your local aggregate and target block strength rather than catalogue defaults.</li> <li>Configuration set against your actual mix design and site conditions, with installation support and operator training included.</li> </ul>
High quality block machine
QT4-18 Automatic Concrete Block Making Machine – Full Range Manufacturer
<p><strong>QT4-18 Automatic Concrete Block Making Machine, 24 kW, PLC Control, 40-50 kN Vibration</strong> — positioned in the mid-tier of our full machine range, bridging semi-auto entry models and high-capacity lines. Hydraulic pressure matched to vibration force for consistent block density across hollow blocks, pavers and solid bricks on 850×550 mm pallets. Output stated per block format, not a single catalogue figure. Machine, mould, pallet and handling specified as one matched system, with configuration set against your local aggregate and target format.</p>
High quality block machine
QT4-18 Hollow Block Forming Machine with Cement – Factory Supply
<p><strong>QT4-18 Hydraulic Block Making Machine, 40-50 kN Vibration, PLC Control</strong> — positioned in SHIYUE's mid-tier range, bridging small workshop and high-capacity lines. Molding cycle 15-25s across hollow block, solid brick and paver formats with PLC consistency. Pallet size 850×550×25 mm confirmable against your curing area and forklift setup. Mould-swappable design covers multiple formats on one press.</p> <ul> <li>Capacity figures tied to specific block sizes, not generic cycles per hour</li> <li>Semi-automatic start with automation upgrade path as demand grows</li> <li>Line layout and factory test record provided before shipment</li> </ul>
High quality block machine
QTJ4-35 Small Concrete Block Making Machine – Full Range
<p><strong>QTJ4-35 Small Concrete Block Making Machine, 11.15 kW, 30 kN Vibration Force</strong> — semi-automatic entry-tier press with four-lead guide frame and upper/bottom mould compression for consistent block density.</p> <ul> <li>35 s molding cycle supporting 8-inch, 6-inch hollow blocks and solid bricks</li> <li>850×450 mm pallet size suited to small workshop curing areas</li> <li>Multiple mould formats from one machine for market flexibility</li> </ul> <p>The QTJ4-35 sits at the starting tier of our range, letting buyers match configuration to local aggregate and target block format before scaling to higher-capacity automatic lines. Every capacity figure we quote states the block format assumed, so daily output expectations stay realistic.</p> <p>Supported by factory test records, packing photographs and confirmed voltage/language documentation before shipment.</p>
High quality block machine
Semi-Automatic Block Machine QTJ4-40 | Full Range
<p><strong>QTJ4-40 Semi-Automatic Concrete Block Making Machine, 10.4 kW, 850×450 mm Pallet</strong> — positioned at the entry-to-mid tier of our semi-automatic range, this skid-mounted press pairs bed mould vertical vibration with upper compression to suit buyers stepping up from manual output. Dual vibration and top die push-pull alignment keep block density uniform across hollow, solid, and paving formats within a compact 1350×1460×1800 mm footprint.</p> <ul> <li>Machine, mould, pallet and handling specified as one matched system against your local aggregate and target format</li> <li>Capacity calculation document states the exact block dimension behind every output figure</li> <li>Voltage, frequency and control language confirmed before production to avoid commissioning delays</li> </ul>
High quality block machine
QT4-18 Hydraulic Concrete Block Machine | Full Range
<p><strong>QT4-18 Hydraulic Concrete Block Machine</strong>, 24 kW, PLC Control, 850×550 mm Pallet — produces hollow blocks, solid bricks, pavers and curbstones in a semi-automatic fixed-plant setup.</p> <ul> <li>Hydraulic station delivers 40-50 KN vibration force matched to your mix design and local aggregate for consistent block density across formats.</li> <li>Output varies by block size; confirm pallet compatibility with your curing area and forklift before ordering.</li> </ul> <p>Configuration is set against your actual raw materials, target block format and site conditions — not a catalogue default, so the line you receive is the line you planned.</p>
Engineered for global performance.
European Design
Airbag systems & 4 vibration motors for higher density
108+ Countries
Trusted exports across Africa, MENA, Asia, LATAM
Full Customization
320+ engineers tailor solutions to local materials
Fast Delivery
In-stock models ship within 15-30 days
Can't find the right model?
Tell us your block size, daily capacity, raw materials and voltage. Our engineers will design a tailored solution within 24 hours.