Shop Concrete Block Machines & Production Lines
Browse our complete range of automatic, mobile, and stationary block machines. European design with airbag systems and four vibration motors — engineered for higher density and lower noise.
All Products
1875 products found
Stationary block machine
QT5-15 Automatic Concrete Block Making Machine | Full Range14
<p><strong>QT5-15 Automatic Concrete Block Making Machine, 21MPa Hydraulic Pressure, 2800–4500 r/min Vibration</strong> — configured as a mid-tier stationary block machine within the full Shiyue range. Platform vibration paired with matched hydraulic pressure ensures block strength aligns with your local aggregate and mix design. Pallet size 1100×550mm and cycle time stated per block format so daily output stays realistic.</p> <ul> <li>Mould and machine specified as one matched system, not assembled from separate suppliers</li> <li>Line layout document states the exact block format behind every capacity figure</li> <li>Factory test record validates cycle time and strength against your mix before shipment</li> </ul>
Stationary block machine
QT5-15 Automatic Hydraulic Concrete Block Making Machine | Full Range
<p><strong>QT5-15 Stationary Block Machine, 21MPa Hydraulic Pressure, 1100×550mm Pallet, 26.5kW</strong> — positioned in the mid-to-high automatic tier of the Shiyue range, this model pairs platform vibration at 2800–4500 r/min with hydraulic demolding to handle hollow blocks, pavers and curbstones across standard output tiers.</p> <ul> <li>Output capacity stated per block format with molding cycle assumptions</li> <li>Full machine, mould, pallet and handling specified as one matched system</li> <li>Factory test record and capacity calculation included before dispatch</li> </ul>
Stationary block machine
QTJ4-24 Automatic Stationary Block Machine – Full Range
<p><strong>QTJ4-24 Stationary Block Machine, 850×450mm Pallet, 45kN Vibration Force</strong> — positioned in the entry tier of our stationary range, this model pairs dual-level vibration with mechanical molding for consistent block density across hollow and solid formats.</p> <ul> <li>Molding cycle 24–26s, full-automatic spiral material distribution</li> <li>350-type reducer for mold lifting, 11.95kW total power</li> <li>Pallet size and curing layout confirmed against your site before shipment</li> </ul> <p>Every machine ships with a format-specific capacity sheet, matched mould drawings, and operator training at commissioning — so your daily output aligns with the original proposal.</p>
Stationary block machine
Block Manufacturing Machine QTJ4-40 for Hollow Bricks | Full Range
<p><strong>QTJ4-40 Semi-Automatic Block Making Machine, 10.4 kW, 40 s Molding Cycle, Dual Vibration System</strong> — positioned in the entry-to-mid tier of stationary block machines, this model balances vibration force with hydraulic compression to deliver consistent density across hollow, solid and paver formats on a single host. Semi-automatic operation keeps investment manageable while preserving a clear upgrade path. Moulds, pallets and line layout are specified as one matched system against your local aggregate and target block format.</p> <ul> <li>Output: 360 pcs/h based on 400×200×200 mm hollow block, 4 pcs/mould</li> <li>Pallet size: 850×450×20 mm</li> <li>Voltage configured to buyer's local supply before shipment</li> </ul>
Stationary block machine
QT7-15 Interlocking Brick Machine with Hollow Block – Factory Supply
<p>Machine, mould and pallet engineered as one matched system rather than sourced separately, with capacity calculations stated per block format and installation support included.</p>
Stationary block machine
QT15-15 Interlocking Brick Machine for Cement Block | Full Range
<p><strong>QT15-15 Stationary Block Machine, 21 MPa Hydraulic Pressure, 45.7 kW</strong> — positioned at the high-capacity tier of our stationary range for buyers planning a full block plant. Vibration force and hydraulic pressure are matched to your mix design and local aggregate, while the airbag damping system lets operators adjust amplitude by brick format. Pallet size, automation level, and mould formats are specified as one system. Configuration confirmed against your target block format and site conditions before production begins.</p> <ul> <li>Four external vibration motors with reduced individual starting load</li> <li>Dual-side synchronous gear for four-point upper mould stability</li> <li>European-design feeder with turning arm cylinder for uniform material distribution</li> <li>Output capacity stated per block format with mould cavity count</li> </ul>
Stationary block machine
QT4-15 Automatic Hollow Block Making Machine | Full Range Manufacturer
<p><strong>QT4-15A Stationary Block Machine, 16–21 MPa Hydraulic Pressure, 55 kN Vibration Force</strong> — positioned in the mid-tier of the Shiyue fully automatic range, bridging entry-level semi-automatic plants and high-capacity production lines. Platform vibration at 4200 r/min supports hollow blocks, solid blocks, pavers and interlocking bricks on 880×550 mm pallets. Hydraulic pressure and vibration force are matched to your target mix design for consistent block density across formats.</p> <ul> <li>Machine, mould, pallet and handling specified as one matched system</li> <li>Configuration set against your local aggregate and block format, not a catalogue default</li> <li>Installation support with operator training and ongoing mould supply</li> </ul>
Stationary block machine
QT4-15B Automatic Construction Block Machine | Full Range
<p><strong>QT4-15B Automatic Concrete Block Making Machine, Fully Automatic PLC Control, Multiaxis Synchronizer Vibration</strong> — positioned in the mid-tier of the Shiyue stationary block machine range between entry-level semi-automatic models and high-capacity production lines. Output capacity is stated per block format, covering hollow blocks, paving bricks, and standard bricks so daily throughput expectations remain realistic. Hydraulic pressure and vibration force are matched to the buyer's mix design and local aggregate for consistent block strength.</p> <p>Machine, mould, pallet and handling equipment are specified as one matched system rather than assembled from separate suppliers.</p>
Stationary block machine
QT18-25 Stationary Block Machine | Full Range Manufacturer
<p><strong>QT18-25 Fully Automatic Pallet-Free Block Making Machine, 2800–4500 r/min Vibration, 50–300mm Brick Height</strong> — configured with platform vibration and hydraulic demolding for consistent block density across hollow, solid, paver and interlocking formats. As part of our complete stationary range, this high-capacity model eliminates pallet handling from the line so you can compare automation tiers against your actual site conditions. Line layout and per-format capacity calculation provided before order confirmation.</p>
Stationary block machine
QT10-15 Fully Automatic Block Making Machine | Full Range
<p><strong>QT10-15 Stationary Block Machine, Full Automatic, Four-Axis Vibration</strong> — specified as one matched system with mould, pallet and handling equipment rather than sourced separately. Dynamic and static table with frequency conversion delivers up to 20g acceleration, while the 360° rotating arch breaker ensures uniform material distribution across interchangeable moulds for hollow, paving and interlocking formats.</p> <p>Each configuration is set against your local aggregate and target block format, so capacity figures reflect the products your market actually sells.</p>
Stationary block machine
QTJ4-25 Stationary Block Making Machine | Full Range
<p><strong>QTJ4-25 Stationary Block Making Machine, 850×550mm Pallet, 45.5kN Vibration</strong> — entry-tier model in our stationary range, paired with matching moulds and pallets for hollow blocks, solid blocks, pavers, and curbstones.</p> <ul> <li>Platform vibration at 4200 r/min with 16–21 MPa rated pressure ensures consistent block density across common concrete mixes.</li> <li>25–30s molding cycle suits small-to-medium daily output, ideal for first-time plant setups or on-site contractor production.</li> <li>Compact 200 m² factory footprint keeps investment and space requirements manageable for startups and workshop-based operations.</li> <li>Multi-format mould compatibility on a single platform lets you add block types as market demand grows.</li> </ul> <p>We specify every machine against your local aggregate, target block format, and curing conditions—not a catalogue default.</p>
Stationary block machine
QT6-15 Block Machine for Hollow Concrete – Manufacturer
<p><strong>QT6-15 Stationary Block Machine, 21 MPa Hydraulic Pressure, PLC Control</strong> — fully automatic hydraulic forming with platform vibration at 4500–5100 r/min, delivering consistent block density across hollow and solid formats. Moulding cycle ranges from 15–25 s depending on block size and mix design. Replaceable mould system supports quick format changes within the Shiyue stationary range for plant buyers evaluating output tiers.</p> <ul> <li>Matched to your actual mix design, local aggregate and target block format</li> <li>Pallet and handling specified as one system with your curing layout</li> <li>Factory test record and full documentation provided before shipment</li> </ul>
Engineered for global performance.
European Design
Airbag systems & 4 vibration motors for higher density
108+ Countries
Trusted exports across Africa, MENA, Asia, LATAM
Full Customization
320+ engineers tailor solutions to local materials
Fast Delivery
In-stock models ship within 15-30 days
Can't find the right model?
Tell us your block size, daily capacity, raw materials and voltage. Our engineers will design a tailored solution within 24 hours.