Shop Concrete Block Machines & Production Lines
Browse our complete range of automatic, mobile, and stationary block machines. European design with airbag systems and four vibration motors — engineered for higher density and lower noise.
All Products
1468 products found
Stationary block machine
QT4-15 Hollow Block Making Machine | Manufacturer
<p><strong>QT4-15 Hydraulic Concrete Block Making Machine, 27.5 kW, 1020×570 mm Pallet</strong> — positioned in the mid-tier automatic range, this stationary block machine bridges semi-automatic entry models and high-capacity lines.</p> <ul> <li>Computer-controlled directional vibration with low-frequency feeding and high-frequency pressing ensures consistent block density across formats</li> <li>Swing-type hopper cutting device delivers uniform material distribution into the moulding box</li> <li>150 m² workshop footprint with 3–4 operators required, paired with JS500 mixer</li> </ul> <p>Specified as a matched system with mould, pallet and handling configured to your local aggregate and target block format — not a catalogue default.</p>
Stationary block machine
QT4-16 Block Making Machine | Full Range Manufacturer
<p><strong>QT4-16 Stationary Block Making Machine, 900×550mm Pallet, 21MPa Hydraulic Pressure</strong> — positioned in the mid-tier of the Shiyue stationary range, bridging semi-automatic workshop setups and high-capacity fully automatic lines. Vibration force and hydraulic pressure are matched to your local aggregate and mix design, while PLC control with fault diagnosis keeps cycle times consistent across hollow, solid and paver formats.</p> <ul> <li>Capacity figures confirmed per block format before quotation</li> <li>Pallet size verified against your existing curing area and forklift</li> <li>Voltage, frequency and PLC language locked before production</li> </ul>
Stationary block machine
QT4-15 Cement Block Making Machine | Full Range – Shiyue
<p><strong>QT4-15 Hydraulic Concrete Block Making Machine, 27.5 kW, 40 kN Vibration Force</strong> — mid-tier model within Shiyue's full stationary range, positioned between entry-level and high-capacity lines. Siemens motor with synchronous table-and-mould vibration delivers consistent block density across hollow, solid, and paving formats. Swing-type hopper ensures uniform material feed into the mould box.</p> <ul> <li>Machine, mould, pallet, and handling specified as one matched system against your actual mix design and target block format</li> <li>Capacity calculation provided per format with stated assumptions, so daily output matches your production plan</li> <li>Installation support with operator training and ongoing mould and wear parts supply</li> </ul>
Stationary block machine
QT4-15 Automatic Concrete Block Making Machine | Full Range
<p><strong>QT4-15 Automatic Concrete Block Making Machine, 27.5 kW, PLC Control</strong> — positioned in the mid-tier of our stationary block machine range, this model pairs computer-controlled directional vibration with a Siemens motor for consistent block density across hollow, solid, and paving formats. The 1020 × 570 mm pallet and swing-type hopper feeding suit buyers stepping up from semi-automatic lines without committing to a high-capacity plant.</p> <ul> <li>Specified as a matched system: machine, mould, pallet and handling configured to your target block format</li> <li>Capacity calculations state the exact block format assumed, so daily output matches expectation</li> <li>Voltage, frequency and PLC language confirmed before production to avoid commissioning delays</li> </ul>
Stationary block machine
Automatic Hydraulic Block Machine QT8-15 for Hollow Block | Full Range
<p><strong>QT8-15 Stationary Block Machine, 21 MPa Hydraulic Pressure, 45 kN Vibration</strong> — configured for hollow blocks, solid blocks, pavers and curbstones with 15-25 s molding cycle and 950×900 mm pallet support.</p> <ul> <li>Sits in the upper-mid tier of our automatic range, bridging smaller semi-automatic setups and high-capacity lines</li> <li>55.5 kW overall power, 500 m² recommended factory area, fully automatic PLC control</li> </ul> <p>Specified as a matched system against your actual mix design and target block format — line layout and capacity calculation provided per product.</p>
Stationary block machine
QTJ4-40 Stationary Block Machine for Hollow & Paver Blocks – Compact
<p><strong>QTJ4-40 Stationary Block Machine, 850×450mm Pallet, 9.5kW</strong> — positioned at the entry tier of our stationary range for small-scale hollow and paver block production.</p> <ul> <li>35 kN vibration force with table vibration feeding and fluctuation vibration molding</li> <li>Electrical-mechanical interworking control reduces operator error during mould change</li> <li>Cycle time and daily output depend on block format, wall thickness, and local aggregate — we state the assumed format with every capacity calculation</li> </ul> <p>Supplied as one matched system from a single-focus block machinery manufacturer, with pallet, mould and handling specified together rather than sourced separately.</p>
Mobile block machine
QMJ2-45 Mobile Block Making Machine – Full Range
<p><strong>QMJ2-45 Mobile Block Making Machine, Pallet-Free Egg-Laying, Manual Operation</strong> — produces hollow blocks directly on a flat concrete floor without pallets, moving freely across the site.</p> <ul> <li>Capacity figures are stated per block format: 400×200×200mm hollow brick at 2 pcs/mould with a 25-30s molding cycle, alongside 400×150×200mm and 400×100×200mm options via mould change</li> <li>Operated by 1 to 3 workers, suited for on-site production where pallet logistics and curing rack space are unavailable</li> </ul> <p>The QMJ2-45 sits at the entry point of our mobile machine range — buyers can start here and later move to semi-automatic or fully automatic stationary lines as output demands grow.</p> <p>Every quotation includes a capacity calculation document stating the exact block format assumed, so daily output matches expectation from day one.</p>
Mobile block machine
Full Range QMJ2-45 Mobile Block Making Machine – Hand-pushed Small
<p><strong>QMJ2-45 Mobile Block Making Machine, hand-pushed egg-laying, 1-3 workers</strong> — entry point of the mobile range for buyers starting block production with minimal capital and no fixed plant.</p> <ul> <li>Produces three hollow brick formats (400×200×200, 400×150×200, 400×100×200 mm) via mould swap, 25-30s cycle per format</li> <li>Pallet-free design lays blocks directly on the ground, eliminating pallet cost and handling</li> <li>Suitable for off-grid sites with no power dependency</li> </ul> <p>Specified as a matched system against your actual mix design and local aggregate, with full mould drawings and capacity calculation stated per block format before you order.</p>
Mobile block machine
Mobile Egg Laying Block Machine with Engine Motor – Factory Supply
<p><strong>QMJ4-45 Mobile Egg Laying Block Machine, 6 KW Engine Motor, 45s Cycle, No Pallet Required</strong> — designed for on-site hollow block production without fixed plant infrastructure. Positioned at the entry level of our mobile range, this machine eliminates pallet investment while laying blocks directly on ground. Diesel or petrol engine enables operation in areas without grid electricity, suited for contractors and first-time plant setups.</p> <ul> <li>Twice-vibration molding core ensures consistent block density</li> <li>Realistic daily output documented per hollow block format</li> <li>Configured as one matched system with mould and handling aligned to your target block format</li> </ul>
Mobile block machine
QMJ4-45 Mobile Block Machine for Hollow Block – Manufacturer
<p><strong>QMJ4-45 Mobile Egg Laying Block Making Machine, 6 kW, 45 s Molding Cycle, Diesel/Petrol Engine</strong> — produces hollow blocks directly on the ground without pallets, ideal for on-site production or first-time plant setups. Output is broken down per block format: 4 pcs/mould for 400×200×200 mm, 5 pcs/mould for 400×150×200 mm, and 6 pcs/mould for 400×120×200 mm. Twice-vibration molding improves block density and strength consistency across varying mix designs.</p> <ul> <li>Mould design and supply matched to the formats your local market actually sells, including custom drawings</li> </ul>
Mobile block machine
QMY12-15 Automatic Hollow Block Making Machine | Full Range
<p><strong>QMY12-15 Automatic Hollow Block Making Machine, Hydraulic Pressure, 9/8/6/4 Inch Formats</strong> — designed for scalable hollow block and cement brick production with engine gear driven assembly.</p> <ul> <li> <p>Positioned within the full automatic block machine range, the QMY12-15 uses matched hydraulic pressure and vibration force tuned to your local aggregate and mix design for consistent block density.</p> </li> <li> <p>Multi-format mould compatibility (9, 8, 6 and 4 inch hollow blocks) with automatic pallet feeding and stacking configuration.</p> </li> <li> <p>Line layout, capacity calculation per format, mould drawings and factory test records are supplied together so specifications match real output on your site.</p> </li> </ul>
Mobile block machine
QMJ4-45 Mobile Hydraulic Pressure Concrete Block Making Machine – Manufacturer
<p><strong>QMJ4-45 Mobile Egg Laying Block Making Machine, 6KW Engine-Powered, 40-45s Molding Cycle</strong> — designed for on-site hollow block production without a fixed plant or pallet inventory.</p> <ul> <li>Twice-vibration molding core delivers higher block density; diesel or petrol engine eliminates grid dependency on remote sites</li> <li>Egg-laying design produces directly on the ground with no pallet cost, supporting 400×200×200mm, 400×150×200mm and 400×120×200mm hollow block formats</li> <li>Machine, mould and handling are specified as one matched system against your actual mix design and target block format, not a catalogue default</li> </ul>
Engineered for global performance.
European Design
Airbag systems & 4 vibration motors for higher density
108+ Countries
Trusted exports across Africa, MENA, Asia, LATAM
Full Customization
320+ engineers tailor solutions to local materials
Fast Delivery
In-stock models ship within 15-30 days
Can't find the right model?
Tell us your block size, daily capacity, raw materials and voltage. Our engineers will design a tailored solution within 24 hours.