Shop Concrete Block Machines & Production Lines
Browse our complete range of automatic, mobile, and stationary block machines. European design with airbag systems and four vibration motors — engineered for higher density and lower noise.
All Products
1476 products found
Stationary block machine
QTJ4-25 Concrete Block Making Machine – Full Range
<p><strong>QTJ4-25 Semi-Automatic Concrete Block Making Machine, 17.9 kW, 60 kN Vibration Force, 25 s Molding Cycle</strong> — positioned in the Shiyue range for buyers mapping where a semi-automatic tier fits before scaling to higher output lines. The hydraulic station pairs with bed and upper mould vibration to keep block density consistent across hollow, solid and paver formats on the same 850×550 mm pallet size. Shiyue specifies the QTJ4-25 against your actual mix design and local aggregate rather than a catalogue default.</p>
Stationary block machine
QT5-15 Automatic Hydraulic Concrete Block Making Machine | Full Range
<p>Machine, mould, pallet and handling specified as one matched system with line layout and capacity stated per block format, not a generic catalogue figure.</p>
Stationary block machine
Stationary Block Machine 4-25 | Full Range Manufacturer
<p><strong>QTJ4-25 Semi-Automatic Concrete Block Making Machine, 17.9 kW, 60 kN Vibration</strong> — positioned in the semi-automatic tier of the Shiyue stationary block machine range, between mobile egg-laying models and full automatic lines. Hydraulic pressure paired with vertical mould vibration ensures consistent block density across hollow, solid and paver formats using your local aggregate. Machine, mould and pallet are specified as one matched system with capacity calculated per target block format.</p>
Stationary block machine
QTJ4-40 Semi-Automatic Concrete Block Making Machine | Full Range
<p><strong>QTJ4-40 Semi-Automatic Concrete Block Making Machine, 850×450mm Pallet, Platform Vibration 2800 r/min</strong> — positioned in the entry-to-mid tier of our stationary range, this press pairs hydraulic pressure with platform vibration matched to semi-dry mix for consistent block density across hollow, solid and paver formats. Mould change is straightforward, and the 200 m² footprint suits first-time plants or on-site contractor use.</p> <ul> <li>Output capacity stated per block format and shift length to avoid shortfall surprises</li> <li>Pallet size confirmed against your curing area and forklift before production</li> <li>Machine, mould and handling specified as one matched system from a single supplier</li> </ul>
Stationary block machine
Concrete Block Making Machine with Hydraulic Motor – Factory Supply
<p><strong>QTJ4-40 Hydraulic Concrete Block Making Machine, 2800 r/min Platform Vibration, 850×450mm Pallet</strong> — positioned at the entry-level semi-automatic tier in our stationary block machine range, bridging manual egg-laying units and fully automatic lines. Platform vibration is matched to pallet size for consistent density across hollow, solid and paver formats, while the push-and-pull top die with automatic scraper keeps operation to 1-3 workers.</p> <ul> <li>Output stated per block format: 360 pcs/h based on 400×200×200mm hollow block, 900 pcs/h based on 225×112.5×60mm paver</li> <li>Compact 1350×1460×1800mm footprint suits first-time plant setups with limited space</li> <li>Semi-automatic tier allows future upgrade within the same range</li> </ul> <p>Every configuration is set against your actual mix design and local aggregate, not a catalogue default.</p>
Stationary block machine
QTJ4-25 Semi-Automatic Block Machine | Full Range Manufacturer
<p><strong>QTJ4-25 Semi-Automatic Block Machine, 17.9 kW, 25 s Molding Cycle</strong> — positioned at the entry point of the stationary block machine range, this model suits first-time buyers or contractors needing on-site production without the investment of a full automatic line. Dual vibration (bed mould vertical + upper mould compression) ensures consistent block density across hollow, solid, paver, and curbstone formats. Machine, mould, and pallet are specified as one matched system with capacity clearly stated per format.</p> <ul> <li>Output: 960 pcs/h based on 400×200×200mm hollow block, 4 pcs/mould </li> <li>Pallet size: 850 × 550 × 20 mm, matched to curing area and handling setup </li> <li>Mould change covers multiple formats on a single host machine</li> </ul>
Stationary block machine
Hydraulic Cement Hollow Block Making Machine – Full Range
<p><strong>QTJ4-25 Semi-Automatic Concrete Block Making Machine, 17.9 kW, 60 kN Vibration</strong> — sits in the mid-range tier of Shiyue's full stationary block machine lineup, bridging mobile egg-layers and high-capacity automatic lines.</p> <ul> <li>Moulding cycle of 25 s with hydraulic station for stable pressure and extended service life</li> <li>Interchangeable moulds cover hollow, solid, paver and curbstone formats</li> <li>Machine, mixer and pallet specified as one matched system to your actual mix design and site conditions</li> <li>Voltage, control language and pallet sizing confirmed before production to avoid commissioning delays</li> </ul> <p>Factory test record and packing photographs provided before shipment, with installation and operator training support included.</p>
Stationary block machine
QT8-15 Concrete Block Machine for Pavers – Full Range
<p><strong>QT8-15 Stationary Block Machine, 21 MPa Hydraulic Pressure, 950×900 mm Pallet</strong> — positioned in the mid-to-high output tier of our full stationary range. Platform vibration at 2800–4500 r/min is matched to the mould box for consistent paver density, while the forced rotational feeding unit ensures uniform material distribution across the cavity. PLC-controlled HMI dialogue system supports process monitoring and signal analysis for batch-to-batch consistency.</p> <ul> <li>Configuration set against your actual mix design, local aggregate, and target block format</li> <li>Machine, mould, pallet, and handling specified as one matched system</li> <li>Automation level selectable so you can start semi-automatic and expand later</li> </ul>
Stationary block machine
LY7-10 Automatic Compressed Earth Interlocking Block Machine | Full Range
<p><strong>LY7-10 Automatic Compressed Earth Interlocking Block Making Machine, Stationary Type, Clay Soil Raw Material</strong> — positioned in the automatic tier of our full stationary block machine range, this model sits above semi-automatic and mobile options for buyers scaling output without jumping to a high-capacity line. Plant footprint and automation level are matched to your project's daily throughput target.</p> <ul> <li>Mould format designed for compressed earth interlocking blocks from local clay soil</li> <li>Line layout and capacity document states exact block format behind every output figure</li> <li>Configuration set against your actual mix design, with voltage and PLC language confirmed before production</li> </ul>
Stationary block machine
Full Range Stationary Block Making Machine – QTJ4-35 Manual
<ul> <li>Specified as a matched system covering host, moulds and pallets, with capacity calculated per block format and operator training provided at commissioning.</li> </ul>
Stationary block machine
QT8-15 Interlocking Hydraulic Brick Machine | Full Range
<p><strong>QT8-15 Hydraulic Block Making Machine, 21 MPa, 950×900 mm Pallet, PLC Control</strong> — positioned in the mid-to-high output tier of our stationary block machine range. Platform vibration at 2800–4500 r/min and 60 kN force are matched to the buyer's actual mix design and local aggregate rather than a catalogue default. Semi-closed rotational feeding ensures even material distribution for consistent block density across hollow, solid, and paver formats.</p> <ul> <li>Line layout, capacity calculation, and mould format list provided with every quotation so buyers verify real output before ordering</li> <li>Machine, mould, pallet, and handling equipment specified as one matched system</li> <li>Voltage, frequency, and PLC display language confirmed before production to avoid commissioning delays</li> </ul>
Stationary block machine
Hollow Block Concrete Block Making Machine QT5-15 – Manufacturer
<p><strong>QT5-15 Automatic Stationary Block Machine, 21 MPa Hydraulic Pressure, 1100×550 mm Pallet</strong> — configured with hydraulic platform vibration and PLC fault diagnosis for consistent block density across formats.</p> <ul> <li>Output ranges from 7,200 to 28,800 pcs/8h depending on block format and mould configuration</li> <li>Vibration frequency adjustable between 2,800–4,500 rolls/min to match your local aggregate and mix design</li> <li>Full automatic cycle with 15–20 second forming time</li> </ul> <p>We match every QT5-15 to your actual block format, local raw materials and site voltage before production begins.</p>
Engineered for global performance.
European Design
Airbag systems & 4 vibration motors for higher density
108+ Countries
Trusted exports across Africa, MENA, Asia, LATAM
Full Customization
320+ engineers tailor solutions to local materials
Fast Delivery
In-stock models ship within 15-30 days
Can't find the right model?
Tell us your block size, daily capacity, raw materials and voltage. Our engineers will design a tailored solution within 24 hours.