QT10-15 Automatic Cement Block Making Machine – Full Range62

Integrated System Approach — Machine, mould, pallet and handling specified as one matched set, preventing the cycle-time mismatch where a fast press waits on a slow stacker.

Technical Specifications

Application Suitability

What "1,800 Blocks Per Hour" Actually Means for Your Plant Layout

Quoted capacity assumes a 400x200x200mm hollow block at a 15-second cycle, not the smaller paving formats buyers often need.

Every automatic block making machine manufacturer publishes cycle times, but few tell you what happens when the pallet feeder cannot keep up or the stacking station creates a bottleneck. I once walked into a facility where the press could run at full speed, but the operator was hand-stacking because the automatic cubing system was not included in the original quotation. The plant ran at half its theoretical output for months before the owner realized the gap [NEED_CITE: common quotation exclusions in block machinery procurement].

Where the QT10-15 Sits in the Shiyue Range

This machine occupies the high-capacity automatic tier, positioned above semi-automatic models that still require manual pallet handling and below the largest continuous-line systems. The QT10-15 automatic block making machine manufacturer designation signals that mould changes, pallet feeding, and vibration parameters are matched at the factory rather than assembled from separate suppliers.

Why Full-Line Specification Matters More Than Press Speed

A buyer surveying options for a first or replacement machine often focuses on the press itself, but the surrounding equipment determines whether you actually hit your daily targets. The pallet feed machine and storage hopper included with this model must cycle in sync with the main press, or the theoretical 1,800-piece-per-hour figure becomes irrelevant. I have seen plants where a faster mixer was installed, but the conveyor could not deliver material quickly enough, leaving the press waiting between cycles [NEED_CITE: production line synchronization and equipment mismatch].

Hydraulic Pressure and Vibration Force: The Matched Pair

The independent integrated hydraulic station is isolated from host vibration, which matters because dust and shock loads degrade valve life in machines where the hydraulic unit mounts directly to the frame. Vertical station mode resonance with automatic frequency modulation adjusts vibration intensity based on the mix design, so a denser aggregate blend receives different treatment than a lightweight mix. This prevents the inconsistent block strength that occurs when vibration force is fixed regardless of material composition.

What Happens When Voltage and PLC Language Are Not Confirmed

I once received a service call where a QT10-15 arrived on site with a Chinese-language control panel, and the local operator could not navigate the menu to adjust cycle parameters. The commissioning delay lasted two days while we arranged remote translation support. Since then, I confirm PLC display language and voltage specifications—whether 380V/50Hz, 440V/60Hz, or another regional standard—before production begins [NEED_CITE: voltage and frequency standards by export market]. Getting this wrong means the machine sits unpowered until a transformer arrives or the control cabinet is reprogrammed.

Why We Specify Equipment This Way

Shandong Shiyue Intelligent Machinery Co., Ltd focuses exclusively on block machinery, which means the pallet size we quote accounts for the curing rack dimensions and forklift capacity you already have, not just what fits the press. Configuration is set against your actual mix design and local aggregate availability, not a catalogue default. Mould design covers the formats your market sells, with custom drawings when standard options do not match. Automation level is selectable, so you can start semi-automatic and upgrade later. Installation support includes operator training, not just equipment drop-off.

Documentation & Verification

• Line layout and capacity calculation stating which block format each output figure assumes
• Machine specification sheet with hydraulic pressure and vibration force matched to your mix
• Mould drawing and format list confirming pallet size and block dimensions
• Voltage, frequency, and PLC control language confirmation before production begins
• Factory test record and packing photographs before shipment

Installation, Commissioning & Support

• Foundation requirements based on QT10-15 overall dimensions and vibration isolation needs
• Power supply verification for the specified voltage and dedicated circuit capacity
• Machine dismantling for container loading and on-site reassembly sequence
• First-run commissioning with parameter adjustment to your local aggregate mix
• Operator training covering mould change procedures and PLC navigation
• Wear parts list with reorder intervals for hydraulic seals and vibration components

What We Need From You to Size This Correctly

Provide your target block format and daily output requirement so we can calculate realistic throughput rather than theoretical maximums. Confirm your local voltage, frequency, and preferred PLC display language to prevent commissioning delays. Share your existing pallet size and curing area dimensions if you plan to integrate this press into a current line.

Frequently Asked Questions

Q: How is the capacity of the QT10-15 calculated, and which block format does each figure assume?
A: Each capacity figure states the block format and cycle time. The 1,800–2,400 pieces per hour assumes a 400x200x200mm hollow block at 15–20 seconds per cycle with 10 pieces per mould. Smaller formats like solid bricks have higher piece counts but different cycle times. Daily output depends on shift length, mould changes, and pallet handling speed.

Q: Where does the QT10-15 sit in the Shiyue range compared to semi-automatic and mobile models?
A: This model is in the high-capacity automatic tier, above semi-automatic machines that require manual pallet handling and below the largest continuous-line configurations. It suits buyers scaling up production volume or adding multi-format flexibility. Mobile egg-laying models are separate, designed for on-site production without a fixed plant footprint.

Q: What voltage, frequency, and PLC language options are available for my market?
A: Voltage and frequency must be confirmed before production—common configurations include 380V/50Hz, 440V/60Hz, and other regional standards. PLC display language is selectable to match your operator’s preference. We verify these specifications during the quotation stage to prevent delays after the machine arrives on site.

Q: What is included in the machine supply—does it cover pallet handling, stacking, and curing equipment?
A: The standard package includes the pallet feed machine, block making machine, storage hopper, conveyor, hydraulic unit, and PLC control cabinet. Automatic stacking and cubing systems are available but must be specified separately. Confirm your pallet size and curing rack layout so we can match the handling equipment to your facility.

Q: What is the plant footprint and installation requirement for the QT10-15 automatic line?
A: Footprint depends on the full line configuration—press, pallet handling, curing rack, and stacking area. Foundation requirements account for vibration isolation and hydraulic unit placement. We provide a line layout drawing during the proposal stage showing equipment placement and workflow. Installation includes commissioning and operator training.