QT10-15 Automatic Brick Making Machine | Full Range Manufacturer

Matched System Integration — every QT10-15 line we ship pairs the press, mould, pallet, and handling as one verified set rather than separate purchases forced to work together.

Technical Specifications

Application Suitability

Why "Pieces per Hour" Means Nothing Without the Block Format

Capacity only matters when tied to a specific block size, mould cavity count, and cycle time.

Too many automatic block making machine manufacturer quotations list a single peak number without saying which block format produced it. A buyer sees 11,000 pieces per hour and assumes that applies to every product they plan to run, then discovers hollow blocks come off at a fraction of that rate. The cycle time difference between a 240×115×53mm solid brick and a 400×200×200mm hollow block changes the daily volume dramatically. When the format assumption stays hidden, the plant misses its revenue target from month one. [NEED_CITE: capacity calculation transparency in block machinery quotations]

Placing the QT10-15 Within the Shiyue Range

The QT10-15 occupies the high-capacity tier of our automatic block making machine manufacturer lineup, sitting above semi-automatic models that suit smaller workshops and below fully continuous lines built for 24-hour operation. Buyers evaluating a first plant or replacing an ageing press use this model as the reference point where output volume justifies the investment in automatic pallet feeding and PLC-controlled batching. The footprint requires a dedicated curing area and forklift circulation space that mobile or egg-laying machines simply do not demand.

Matching Automation Level to Your Labour Reality

A fully automatic line like the QT10-15 removes manual pallet handling and stacking from the operator’s daily routine, replacing those tasks with mechanical feeds and controlled cubing sequences. For markets where skilled press operators are scarce, this reduces the headcount on the production floor and limits batch-to-batch variation caused by inconsistent manual feeding. The PLC control cabinet stores recipes per block format, so switching from hollow blocks in the morning to paving blocks after lunch becomes a parameter recall rather than a full recalibration. [NEED_CITE: automation impact on block plant labour requirements]

Reading the Specs That Actually Shape Your Output

The independent integrated hydraulic station sits apart from the main vibration zone, which keeps hydraulic oil temperature and contamination under control during long shifts producing high-density pavers. Vertical station mode resonance with automatic FM-AM adjusts vibration frequency and amplitude depending on the mould loaded, meaning a hollow block mould receives different energy input than a solid brick mould without manual intervention. The quick replacement mould system shortens format changeover to a practical timeframe within a single shift, so running two or three block types per day does not consume productive hours. Pallet size chosen for this machine must align with the curing rack dimensions and the forklift capacity already on site, otherwise freshly pressed blocks bottleneck before they even enter the curing area.

The Hidden Cost of Skipping Configuration Alignment

When an automatic block making machine arrives configured for a mix design the buyer cannot source locally, the plant either imports expensive aggregate or produces blocks that fail compressive strength tests. Mould cavities cut for a format the local market does not buy sit unused while the buyer pays for a second set. Voltage and frequency left unconfirmed before production lead to motor rewinds or transformer rentals on the first day of commissioning, delaying the entire project schedule. [NEED_CITE: block machine commissioning delays from unconfirmed electrical specifications]

What Shiyue Brings Beyond the Press Itself

Block machinery is our single focus, so the QT10-15 ships with mould, pallet, and handling equipment specified as one matched system rather than assembled from unrelated suppliers. Configuration starts from the buyer’s actual mix design and local aggregate, not a catalogue default that ignores regional material differences. Mould design covers the formats the buyer’s market actually sells, including custom drawings when standard cavity layouts do not match local block dimensions. The automation level remains selectable, so a buyer can begin with semi-automatic pallet handling and add full stacking later as production volume grows. Installation includes on-site commissioning with operator training, ensuring the crew understands recipe storage and mould change procedures before the service engineer leaves.

Documentation & Verification

• Line layout and capacity calculation stating the block format assumed for each output figure
• Machine specification sheet with hydraulic pressure and vibration force ratings confirmed
• Mould drawing and format list matching the block types your market sells
• Voltage, frequency, and PLC display language confirmation before production begins
• Factory test record on your target block format before dispatch
• Wear parts and mould list with first-replacement part numbers included

Installation, Commissioning & Support

• Foundation plan accounts for QT10-15 vibration isolation and hydraulic station clearance
• Dedicated electrical circuit sized for the PLC cabinet and independent hydraulic pump motor
• Machine arrives factory assembled; on-site team handles final positioning and pallet feed alignment
• Commissioning includes cycle time verification on the buyer’s specific block format and mix
• Operator training covers PLC recipe recall, mould change procedure, and daily vibration check
• Wear parts list identifies hydraulic seals and mould liners with reorder codes for first replacement

What We Need Before Quoting Your Line

Send the block formats your local market actually buys, along with target daily volume per format. Include a sample or lab report of your available aggregate so we can confirm the mix design suits the QT10-15 vibration profile. Specify your site voltage, frequency, and preferred PLC display language so electrical and control components match before production starts.

Frequently Asked Questions

Q: How is the QT10-15 capacity verified, and which block format does each figure assume?
A: Every output number in our documentation ties to a specific block dimension, mould cavity count, and cycle time range. The 1,800–2,400 pieces per hour figure applies only to 400×200×200mm hollow blocks on a 10-cavity mould at 15–20 second cycles. We provide a written capacity calculation for each format you plan to produce before order confirmation.

Q: Where does the QT10-15 sit compared to semi-automatic models in investment and footprint?
A: This model sits in the high-capacity automatic tier, requiring a larger curing area, dedicated power supply, and forklift circulation space that semi-automatic or mobile machines do not need. Investment covers the full line including pallet feed, conveyor, and PLC control. Buyers starting with lower volume typically begin on semi-automatic equipment and upgrade later.

Q: What electrical and control details are confirmed before shipment?
A: Voltage, frequency, and PLC display language are confirmed in writing before production begins. The QT10-15 ships with a control cabinet configured for the buyer’s local grid standard and operator language preference, preventing commissioning delays caused by mismatched electrical components or unreadable interface text upon arrival.

Q: How long does a mould change take, and what formats are in standard stock?
A: The quick replacement system allows format changeover within a practical portion of a production shift. Standard mould stock covers hollow blocks, solid bricks, paving blocks, and interlocking formats in common dimensions. Custom mould designs are available to buyer drawings when local market requirements fall outside the standard cavity range.

Q: What on-site support comes with delivery of the QT10-15?
A: Our team handles installation and commissioning on site, verifying cycle times against the buyer’s actual mix and block format. Operator training covers PLC operation, mould change procedures, and daily maintenance routines. Wear parts and mould support continues after the service engineer departs, with a documented parts list for first-replacement ordering.