Shop Concrete Block Machines & Production Lines
Browse our complete range of automatic, mobile, and stationary block machines. European design with airbag systems and four vibration motors — engineered for higher density and lower noise.
All Products
1875 products found
Stationary block machine
QT6-15 Hydraulic Block Making Machine | Full Range
<p><strong>QT6-15 Hydraulic Block Making Machine, 21 MPa Rated Pressure, 880×850 mm Pallet</strong> — positioned in the mid-tier of the Shiyue fully automatic range, bridging workshop-scale output and high-capacity production lines. Hydraulic drive paired with platform vibration at 4500–5100 r/min delivers consistent block strength, while PLC intelligent control with interchangeable moulds supports hollow blocks, solid bricks, and pavers within a single footprint.</p> <ul> <li>Supplied as one matched system covering press, pallet handling, and mould configuration aligned to your local aggregate and target block format.</li> <li>Capacity calculation, voltage, and control language confirmed per block format before production to prevent commissioning delays.</li> <li>Mould drawing and format list provided upfront so the formats your market sells are verified against this tier's capability.</li> </ul>
Stationary block machine
QT6-15 Block Machine with Moulding – Factory Supply
<p><strong>QT6-15 Stationary Block Machine, 21 MPa Hydraulic Pressure, PLC Control</strong> — positioned in the mid-to-high automatic tier, this model pairs platform vibration at 4500–5100 r/min with hydraulic pressing for consistent block density across interchangeable mould formats on an 880×850 mm pallet.</p> <ul> <li>Moulding cycle 15–25 s depending on block format and mix design</li> <li>Fully automatic operation with human-machine dialogue interface</li> </ul> <p>Specified as a matched system — machine, mould, pallet and handling are configured together against your local aggregate and target block format, not pulled from a catalogue default.</p>
Stationary block machine
QTJ4-25 Semi-Automatic Block Making Machine | Full Range
<p><strong>QTJ4-25 Semi-Automatic Block Making Machine, 17.9 kW, 25 s Molding Cycle, 850×550 mm Pallet</strong> — positioned in the entry-to-mid tier of the Shiyue stationary range, bridging manual egg-laying machines and full automatic lines.</p> <ul> <li>Output rated at 960 pcs/h based on 400×200×200 mm hollow block (4 pcs/mould), so daily planning starts from a stated format</li> <li>Hydraulic station with 60 KN vibration force matched to bed mould vertical vibration for consistent block density</li> <li>Mould change supports hollow, solid, paver, and curbstone formats on one host machine</li> <li>Machine, mould and pallet specified as one matched system rather than assembled from separate suppliers, with configuration set against your actual mix design and local aggregate</li> </ul>
Stationary block machine
Concrete Hollow Block Making Machine QTJ4-24 | Manufacturer
<p><strong>QTJ4-24 Semi-Automatic Block Machine, Platform Vibration, 850×450mm Pallet</strong> — entry-level stationary press in our full machine range, with dual vibration motors and dragon gate frame for accurate mould positioning.</p> <ul> <li>Mould formats: 4 pcs hollow block or 21 pcs standard brick per cycle</li> <li>Semi-automatic with optional auto stacker upgrade path</li> </ul> <p>1 2 3 4</p> <p>Trusted by buyers starting their first plant — machine, mould and pallet specified as one matched system against your local aggregate and target format.</p>
Stationary block machine
QTJ4-24 Semi-Automatic Block Machine for Hollow Block | Full Range
<p><strong>QTJ4-24 Semi-Automatic Concrete Block Making Machine, 850×450mm Pallet, 14.25kW Platform Vibration</strong> — positioned at the entry tier of the Shiyue stationary block machine range, bridging small workshop setups to higher-capacity automatic lines.</p> <ul> <li>Platform vibration with dual 3kW lower motors and 1.5kW upper unit, matched to standard concrete mix designs</li> <li>Dragon gate frame with four wear-resisting vertical shafts for accurate mould positioning</li> <li>Semi-automatic control with optional auto stacker for scalable automation</li> <li>Pallet size 850×450mm — confirm compatibility with existing curing area and forklift before ordering</li> </ul> <p>Capacity and cycle times are stated per block format, not as generic cycles per hour, so daily output reflects the formats you actually produce</p>
Stationary block machine
QTJ4-24 Semi-Automatic Stationary Block Machine – Full Range
<p><strong>QTJ4-24 Semi-Automatic Stationary Block Machine, 850×450mm Pallet, 14.25kW</strong> — positioned at the entry tier of the stationary semi-automatic range, this model pairs platform vibration (dual 3kW lower motors with 1.5kW upper excitation) to a dragon gate steel frame on four wear-resisting guide shafts. Mould formats cover 4 pcs/cycle hollow blocks (390×190×190mm) and 21 pcs/cycle solid bricks (240×115×53mm); confirm which format your daily output calculation assumes before ordering. - Voltage, frequency and control language confirmed in writing before production, matched to your site conditions</p>
Stationary block machine
QTJ4-24 Stationary Block Machine for Hollow Blocks – Full Range
<p><strong>QTJ4-24 Semi-Automatic Stationary Block Machine, 14.25kW, 850×450mm Pallet, Platform Vibration</strong> — positioned in our small-plant tier for entrepreneurs and contractors starting block production with room to scale. Dual vibration (2×3kW lower platform + 1.5kW upper) compacts hollow blocks and solid bricks consistently, while the dragon gate frame with four wear-resisting shafts keeps mould alignment through thousands of cycles. Supplied as a matched system with mixer, conveyor and pallet spec — not assembled from separate vendors.</p>
Stationary block machine
QT5-15 Automatic Concrete Block Making Machine | Full Range Manufacturer
<p><strong>QT5-15 Stationary Block Machine, 21 MPa Hydraulic Pressure, PLC Fault Diagnosis</strong> — positioned in the mid-tier of our automatic block machine range, this model delivers full automatic operation with hydraulic platform vibration adjustable from 2800-4500 rolls/minute to match different mix designs. Pallet size 1100×550 mm and overall dimensions 7400×1950×2800 mm help plan plant footprint before committing to a larger or smaller tier.</p> <ul> <li>Supports hollow block, multicellular bricks, paving bricks and standard bricks with output capacity stated per block format</li> <li>Configuration set against your actual mix design, local aggregate and target block format rather than a catalogue default</li> <li>Line layout and capacity calculation provided with block format assumptions clearly stated for each output figure</li> </ul>
Stationary block machine
Hollow Block Making Machine QTJ4-26 | Full Range Manufacturer
<p><strong>QTJ4-26 Semi-Automatic Block Machine, 850×450mm Pallet, 14.25kW</strong> — platform vibration with dual 3kW lower motors and 1.5kW upper unit for consistent compaction; dragon gate frame with four wear-resisting shafts for accurate mould alignment.</p> <p>This model sits in the entry-level tier of our stationary block machine range, helping you match investment level and plant footprint before scaling up.</p> <ul> <li>Configured as a matched system — press, JQ350 mixer and 6m conveyor specified together, not assembled from separate suppliers</li> <li>Upgrade path from manual trolley handling to auto stacker when volume grows</li> <li>Mould drawings and format list provided so you see every compatible block type before ordering</li> </ul>
Stationary block machine
QTJ4-25 Concrete Block Making Machine | Full Range
<p><strong>QTJ4-25 Stationary Block Machine, 17.9 kW, 60 kN Exciting Force</strong> — semi-automatic tier within Shiyue's complete block machine range, positioned between entry-level mobile and fully automatic lines. Hydraulic pressure paired with vertical bed vibration and upper mould compression delivers uniform block density across hollow, solid and paver formats. Pallet size 850×550 mm with manual stacking suits first-plant entrepreneurs evaluating investment levels.</p> <ul> <li>Output stated per format: 960 pcs/h based on 400×200×200 mm hollow block, 4 pcs/mould, 25 s cycle</li> <li>Mould change covers 8-inch, 6-inch, 5-inch and 4-inch formats on a single host machine</li> <li>Line layout, capacity calculation and factory test record provided before shipment</li> </ul>
Stationary block machine
QTJ4-25 Semi-Automatic Concrete Block Making Machine – Full Range
<p><strong>QTJ4-25 Semi-Automatic Concrete Block Making Machine, 17.9 kW, 60 kN Vibration</strong> — delivers 960 pcs/h based on 400×200×200mm hollow block at 4 pcs/mould with a 25-second cycle. Positioned in Shiyue's range as an accessible entry tier for first-time plant owners, this stationary block machine pairs vertical bed mould vibration with upper compression at 60 kN for consistent block density. Mould changes cover hollow, solid, paver and curbstone formats on a single 850×550 mm pallet size.</p> <ul> <li>Line layout and capacity calculation provided per block format assumed</li> <li>Machine configured against buyer's local aggregate and mix design</li> <li>Voltage, frequency and control language confirmed before production</li> </ul>
Stationary block machine
LY7-10 Automatic Compressed Earth Block Machine – Full Range
<p><strong>LY7-10 Automatic Compressed Earth Block Machine, Stationary, Clay Soil Interlocking Block</strong> — positioned within the full stationary block machine range so buyers can compare output tiers, automation levels, and plant footprints before selecting a model. This series covers compressed earth interlocking block production using locally available clay soil, with configuration set against your actual raw material and target block format.</p> <ul> <li>Line layout and capacity calculation provided per confirmed block format</li> <li>Machine specification sheet with hydraulic pressure, vibration force, and pallet size confirmed before production</li> <li>Mould drawing and format list showing all available interlocking profiles</li> <li>Voltage, frequency, and PLC display language confirmed prior to manufacturing</li> </ul> <p>Block machinery is our single focus, meaning the LY7-10 press, mould, pallet, and handling equipment are specified together as one matched system rather than sourced separately.</p>
Engineered for global performance.
European Design
Airbag systems & 4 vibration motors for higher density
108+ Countries
Trusted exports across Africa, MENA, Asia, LATAM
Full Customization
320+ engineers tailor solutions to local materials
Fast Delivery
In-stock models ship within 15-30 days
Can't find the right model?
Tell us your block size, daily capacity, raw materials and voltage. Our engineers will design a tailored solution within 24 hours.