Automatic block machine
<p><strong>QT6-15 Automatic Concrete Block Making Machine, 21 MPa Hydraulic Pressure, 900×700 mm Pallet</strong> — vibration and hydraulic pressing with 15s–20s molding cycle, producing hollow blocks, paving bricks, solid bricks, and interlocking formats on a matched pallet size. Output tiers and automation levels span from simple mixer lines to fully automatic stacking, helping you locate this mid-tier press within the full range.</p> <ul> <li>Configured against your local aggregate and target block format, with line layout and capacity calculation provided per format before production.</li> <li>Pallet size, voltage, and PLC language confirmed upfront; mould design available for your market's formats.</li> <li>Machine, mould, pallet, and handling specified as one matched system, backed by installation support and operator training.</li> </ul>
Configuration matched to your actual block format — the QT6-15 is specified against your target output, local aggregate, and pallet system rather than a generic catalogue default, so capacity figures and supporting equipment reflect what your plant will actually run.
| Parameter | Value |
|---|---|
| Model | QT6-15 |
| Product Type | Automatic Concrete Block Making Machine |
| Molding Way | Vibration and hydraulic pressing |
| Rated Pressure | 21 MPa |
| Molding Cycle | 15s–20s |
| Pallet Size | 900×700 mm |
| Main Machine Weight | 6000 kg |
| Output (Hollow Block 400×200×200 mm) | 1440 pcs/h, 11520 pcs/8h |
| Output (Paving Brick 200×100×60 mm) | 5040 pcs/h, 40320 pcs/8h |
| Output (Solid Brick 240×115×53 mm) | 7680 pcs/h, 61440 pcs/8h |
| Raw Materials | Cement, sand, fly ash, stone powder, slag |
| Product Formats | Hollow blocks, paving bricks, solid bricks, curbstones, interlocking bricks |
| Automation Level | Configurable from simple line to fully automatic line |
| Motor Voltage | Customizable to local voltage (confirm at inquiry) |
| Warranty | 1 year (excluding wearing parts) |
| Assembly State for Shipment | Top cylinder removed for container loading; reassembled on site |
| Application | Material or Output |
|---|---|
| Hollow block production for housing projects | Cement, sand, and crushed stone or fly ash mixes |
| Interlocking brick manufacturing | Cement with laterite, volcanic aggregate, or stone powder |
| Paving brick for roads and walkways | Cement, sand, and fine aggregate blends |
| Solid brick for load-bearing walls | Cement and coarse aggregate with high compaction |
| Curbstone and kerb production | Dense cement-aggregate mixes with extended cycle |
When a supplier quotes the QT6-15 automatic block machine manufacturer capacity as a single number, that figure usually assumes one specific block format — often the smallest and fastest to press. Buyers then plan their daily output around a number the machine never actually delivers on their primary product.
Every capacity figure here is tied to a named block dimension.
The QT6-15 cycles in 15–20 seconds, but that translates to 1440 hollow blocks (400×200×200 mm) per hour while the same machine produces 5040 paving bricks (200×100×60 mm) in the same window. I have seen plants in Southeast Asia base their entire financial model on the paving brick number, only to discover their market primarily demands hollow blocks at a fraction of that throughput [NEED_CITE: block format assumptions in capacity quotations]. The gap between quoted and actual output is the single most common reason first-time buyers feel misled.
The QT6-15 automatic block machine manufacturer sits in the mid-tier of the full machine lineup. Below it, semi-automatic models require manual pallet handling and are suited to small workshops with limited investment. Above it, high-capacity automatic lines add full batching, automatic pallet loading, and cubing systems designed for continuous two-shift operation. The QT6-15 bridges these tiers by offering configurable automation — a buyer can start with a JS500 mixer and an 8 m conveyor belt, then add automatic stacking and pallet separation later as demand grows.
A simple line configuration pairs the QT6-15 with a JS500 mixer, conveyor, and manual pallet handling — enough for contractors producing blocks on a housing project site. A fully automatic line adds a batching machine, cement silo with screw conveyor, automatic pallet loader, stacker, and block-and-pallet separator. The choice depends on labour availability and shift length rather than the press itself. I worked with a plant in Java that ran a simple line on a single shift and later added an automatic stacker when they moved to double shifts; the press needed no modification because the automation level was designed to be modular [NEED_CITE: modular automation in block production lines].
The 21 MPa rated hydraulic pressure works together with vibration to compact the mix into the mould cavity. Higher pressure alone will not produce stronger blocks if the vibration frequency is not matched to the aggregate gradation — a lightweight volcanic aggregate, common across Indonesian quarries, requires different vibration settings than dense crushed granite. The 900×700 mm pallet size must align with your curing rack spacing and the fork dimensions of the forklift you already own; a mismatch here means either rebuilding the curing area or replacing handling equipment. The moulding cycle of 15–20 seconds varies by format and mix moisture, and the cycle time directly determines whether the mixer can keep up or the press sits idle waiting for material.
A buyer once received a block machine configured for 380V/50Hz in a market running 440V/60Hz; the motor overheated within the first week, and commissioning stalled until a replacement motor was shipped [NEED_CITE: voltage mismatch in exported machinery]. Equally, pallets specified without checking the curing rack system lead to bottles-necks: if the pallet is too wide for the rack slots, every block must be re-stacked by hand before curing, wiping out the cycle-time advantage the press was supposed to deliver. These are not engineering failures — they are specification oversights that surface only after the container is opened.
Block machinery is the single focus here, so the press, mould, pallet, and handling equipment are specified as one matched system rather than assembled from unrelated suppliers. The configuration is set against the buyer’s actual mix design, local aggregate, and target block format — not a catalogue default. Moulds for interlocking bricks, hollow blocks, and curbstones are designed in-house to match the formats your local market sells, including custom drawings when standard formats do not apply. The automation level is selectable, allowing a buyer to enter the range at a simple-line budget and expand later. Factory testing is run on the buyer’s block format before dispatch, not on a generic test block.
To size the QT6-15 correctly, share your primary block format and daily output target, the local aggregate type you plan to use, and your existing curing area dimensions. Confirm the voltage and frequency at your site along with the preferred PLC display language. If you already operate a mixer or pallet handling system, provide the model and capacity so the supporting equipment can be matched.
Q: How is the QT6-15 capacity verified, and which block format does each figure assume?
A: Every capacity number is tied to a specific block dimension. The 1440 pcs/h figure assumes a 400×200×200 mm hollow block, while 5040 pcs/h assumes a 200×100×60 mm paving brick. The factory test record documents output on your confirmed format before dispatch, so you see actual throughput rather than a best-case number from a smaller block.
Q: Where does the QT6-15 sit in the full machine range — what tier is above and below it?
A: Below the QT6-15, semi-automatic machines require manual pallet handling and suit smaller workshops. Above it, high-capacity lines add full batching, pallet loading, and cubing for continuous multi-shift production. The QT6-15 occupies the mid-tier with selectable automation, letting you start simple and add stackers or batching later.
Q: What automation level should I choose for my plant size and labour availability?
A: A simple line with a JS500 mixer and conveyor works for single-shift operations with available labour. A fully automatic line with batching, pallet loading, and stacking suits double-shift plants or sites where labour cost is high. The press itself is identical; only the upstream and downstream equipment changes.
Q: What voltage, frequency, and PLC language options are available for my market?
A: Motor voltage is customizable to your local supply. Frequency and PLC display language must be confirmed before production begins. Provide these details at inquiry stage so the electrical schematic and control panel are built to your specification from the start.
Q: What supporting equipment is included in the quotation, and what is optional?
A: The base quotation covers the QT6-15 press and selected moulds. Optional equipment includes the JS500 mixer, conveyor belt, automatic stacker, cement silo, batching machine, pallet loader, and block-and-pallet separator. Each item is quoted separately so you can configure the line to match your budget and site conditions.
Fill in your requirements and our export manager will respond within 24 hours with pricing, specs and a customized solution.
Automatic block machine
Company video Products Description Brief introduction maquina para hacer bloques de cemento QT4-25 shandong concrete...
View Details
Automatic block machine
Product Description QT6-15 Automatic sidewalks color paving brick making machine line produce different shape and...
View Details
Automatic block machine
Products Description 1.Super-strong steel structure made of extensive imported oriainal parts.ensuring more stability and reliability...
View Details
Automatic block machine
small scale concrete block making machineProduct Description QTJ4-26 interlocking brick making machine parameters and specification Overall Dimension2060*1700*2650mmRated...
View DetailsOur 320+ engineers will design a customized solution for your local materials, voltage and site conditions. Get a free layout plan and ROI estimation within 24 hours.
